Abstract:In order to meet the growing industrial demand of high quality and high efficiency machining, long cutters with larger axial depth of cut are extensively implemented in peripheral milling of deep pockets, grooves, and thin-wall parts. However, due to their high flexibilities, chatter easily occurs during the machining process. It has been demonstrated that milling cutters with variable pitch and/or variable helix angles can mitigate the chatter, which are gaining increasingly important applications. Although this kind of cutters have been studied in some detail in previous research, few studies have focused on the interaction dynamics complicated by actual cutter runout in long tool-part contact zone. This paper systematically studies the dynamics and stability of variable-pitch/helix milling system with long end cutters. The cutters are divided into a series of axial disks, and each axial disk includes several cutting elements which are equal to the number of teeth. Variations of pitch and helix angles, cutter run-outs including radial offset and axial tilt, and mode shapes with the cross terms in the orthogonal direction, are assigned to these cutting elements. The system, involving multiple regenerative delays as well as the axially varying dynamics, is formulated as a matrix form of time-periodic delay differential equation with multi-modal dynamic parameters. An updated cross-axis and cross-point modal testing method is then proposed to obtain the dynamic parameters, which can effectively avoid multiple hits when impacting the cutter with hammer. The stability lobes are predicted in state space by developing an improved semi-discretization method, by which the pitch variations and actual runout effects on stability are investigated. It is shown that the stability lobes differ significantly when the combined effects of cross-axis and cross-point FRFs and actual cutter runout are considered. A series of cutting experiments is conducted to demonstrate the proposed model and method. Results show that these lobes well agree with the experimental results.

Cutting conditions dependent adjustment of dynamic responses for slender tools in internal turning with a flexible vibration suppression device

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Vibration Analysis and Suppression in Robotic Hole Chamfering Process

Dynamic simulation and active vibration control design of an ultra-precision fly-cutting machine tool

Chatter Stability Prediction for Deep-Cavity Turning of a Bent-Blade Cutter

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing

A novel quasi-intermittent vibration assisted swing cutting device: Design and experimental investigation

Application of Mirror-Milling Machining System to Suppress Vibration in Thin Plate Work-Piece

Nonlinear dynamic modeling and vibration analysis of whole machine tool

Forced vibration mechanism and suppression method for thin-walled workpiece milling

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

An Investigation of Practical Application of Variable Spindle Speed Machining to Noncircular Turning Process

Analysis and Optimization of Parameters of Machine Tool in Structure Design Based on the Cutting Dynamics with Uncertainty

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Oppositely Oriented Series Multiple Tuned Mass Dampers and Application on a Parallel Machine Tool

Implementation of Inerter-Based Dynamic Vibration Absorber for Chatter Suppression

The Finite Element Analysis and Optimization of an Elliptical Vibration Assisted Cutting Device

Suppression of cutting vibration in side milling of laser cladded layer on thin-walled parts with interfacial structures

Modeling of variable-pitch/helix milling system considering axially varying dynamics with cutter runout offset and tilt effects