Abstract:During subsequent machining of laser cladded workpiece, the stress transferred in depth direction is different from the conventional cast workpiece due to the geometrical discontinuity, resulting in the stress difference and strain discontinuity at the interface between the cladding layer and substrate. Distinguishing from the traditional finite element method model, this paper establishes a model with an inclined interface to investigate the thickness ratio, i.e., the ratio of the removal thickness in subsequent machining to cladding thickness on the machining-induced stress and strain. The results show that the maximum thickness ratio is 0.352 when the removal thickness is 0.1 mm. The change in interfacial shear stress energy dissipation due to interfacial inclination makes this result 22.8% lower than a traditional model with a horizontal interface. With the help of the presented model, the effect of removal thickness on machining-induced stress and strain evolution was investigated. The results show that an increase in the removal thickness will lead to an increase in machining-induced stress and strain. The stress difference and strain increment at the interface increase proportionally with the removal thickness, implying that variations in removal thickness will have a consequential impact on the maximum thickness ratio. Thus, the interaction of material removal thickness and thickness ratio on PEEQ increment at the interface was further analyzed. The response surface results indicate that an increase in the removal thickness leads to a corresponding increase in the maximum thickness ratio, albeit with a minor degree of influence. Therefore, the challenge of fixing the maximum thickness ratio in actual machining due to multi-step processes can be resolved through micro-adjustments. Simultaneously, in engineering applications, workpiece surface defects exhibit varying depths and require different removal amounts after cladding. This study provides further theoretical guidance for repairing and remanufacturing surface defects with diverse depths.

Suppression of cutting vibration in side milling of laser cladded layer on thin-walled parts with interfacial structures

Application of Mirror-Milling Machining System to Suppress Vibration in Thin Plate Work-Piece

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Forced vibration mechanism and suppression method for thin-walled workpiece milling

Improving the surface integrity of laser cladded layer by ultrasonic-assisted burnishing at medium temperature with considering initial surface conditions

Differential analysis of the influence mechanism of ultrasonic vibrations on laser cladding

Support Removal on Thin-Walled Parts Produced by Laser Powder Bed Fusion

Suppressing the burr of high aspect ratio structure by optimizing the cutting parameters in the micro-milling process

Study the effect of anti-vibration edge length on process stability of milling thin-walled Ti-6Al-4V alloy

Simulation and experimental analysis on influences of axial cutting-induced vibration on edge trimming quality of Carbon Fiber Reinforced Plastics

Online vibration monitoring using laser vibrometer and acoustic emission techniques in robotic milling CFRP composites

Research on cutting force and surface integrity of TC18 titanium alloy by longitudinal ultrasonic vibration assisted milling

Friction property and milling machinability of Ni60 cladding layer in hybrid additive-subtractive manufacturing

Sensitivity analysis of stress/strain evolution on removal thickness in machining laser cladded workpiece with a novel FEM method

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling

Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece

An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures

Effects of ultrasonic vibration assisted milling with laser ablation pretreatment on fatigue performance and machining efficiency of SiCf/SiC composites

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Enabling Thin-Edged Part Machining of Nomex Honeycomb Composites via Optimizing Variable Angle of Disc Cutters

Effect of chatter on material removal during surface milling of thin-walled carbon fiber–reinforced plastic (CFRP) components