Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Effect of chatter on material removal during surface milling of thin-walled carbon fiber–reinforced plastic (CFRP) components

Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Planning of cutting tool feed direction for low-damage surface milling of CFRP: considering the changes in the action form of the tool edge on fiber

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Effect of cooling and lubrication conditions on the variable angle milling of unidirectional CFRP with PCD Tools

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

Investigating the material removal mechanism and cutting performance in ultrasonic vibration-assisted milling of carbon fibre reinforced thermoplastic

Research on Tool Wear and Surface Integrity of CFRPs with Mild Milling Parameters

Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Helical milling for making holes on carbon fiber-reinforced polymer

Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects

Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution

Online vibration monitoring using laser vibrometer and acoustic emission techniques in robotic milling CFRP composites

An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures

Analysis of the effects of different milling strategies on helical milling of unidirectional CFRP under minimum quantity lubrication

Simulation and experimental analysis on influences of axial cutting-induced vibration on edge trimming quality of Carbon Fiber Reinforced Plastics

A novel discrete-edge ball end milling cutter: Suitable for milling weakly rigid curved CFRP parts