Abstract:This paper assesses the dynamic performance of permanent magnet synchronous generator based wind turbine (WT) regarding the blade in‐plane fatigue loads once the WT is controlled in the power control mode. Then, an active mitigation approach is proposed to mitigate the blade in‐plane oscillations. The proposed method enhances the damping ratio of the blade in‐plane oscillatory modes by adding a supplementary term into the power control loop that is proportional to the speed difference between the blade and generator. This paper assesses the dynamic performance of permanent magnet synchronous generator‐based wind turbine (WT) regarding the blade in‐plane fatigue loads once the WT is controlled in power control mode. Blade in‐plane oscillations, associated with the poorly blade in‐plane modes, can be excited by turbulent winds or grid disturbances that may lead to damage of the blades and reduce the drive‐train reliability. To overcome this drawback, at first, a model with three degrees of freedom is extracted for the drive‐train system, and then, an active mitigation approach is proposed to mitigate the blade in‐plane oscillations. The proposed method can effectively suppress the blade in‐plane vibrations by adding a supplementary term into the power control loop that is proportional to the speed difference between the blade and generator. The speed difference between the blade and generator is obtained by estimation of the blade‐hub and hub‐generator shaft torsional torques. Next, the performance of the proposed active mitigation approach is examined by the modal and frequency response analyses and time‐domain simulations. Finally, it is shown that the proposed approach has superior performance over the conventional approaches based on the simplified drive‐train model and crossing the measured generator speed through a band‐pass filter.

Out-of-plane vibration mitigation of wind turbine rotor blades using nonlinear energy sink

Application of a new two dimensional nonlinear tuned mass damper in bi-directional vibration mitigation of wind turbine blades

Non-linear dynamic analysis of a wind turbine blade

A novel two dimensional nonlinear tuned mass damper inerter and its application in vibration mitigation of wind turbine blade

Active Vibration Control and Reduction of Shear Force of 5MW Wind Turbine with the Help of Gyroscope Actuator

Nonlinear model predictive control of a vortex-induced vibrations bladeless wind turbine

An efficient power control strategy for active mitigation of blade in‐plane fatigue loading in PMSG‐based wind turbines

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Edgewise vibration reduction of small size wind turbine blades using shunt damping

Nonlinear pitch angle control of an onshore wind turbine by considering the aerodynamic nonlinearities and deriving an aeroelastic model

Nonlinear vibration analysis of horizontal axis wind turbine blades using a modified pseudo arc-length continuation method

Numerical Modeling and Analysis of a Horizontal Axis RM1 NACA-4415 Wind Turbine

Vibration control of horizontal axis offshore wind turbine blade using SMA stiffener

Stability analysis of floating wind turbine structure with turned mass damper-nonlinear energy sink

Study of Centrifugal Stiffening on the Free Vibrations and Dynamic Response of Offshore Wind Turbine Blades

Modeling and dynamic analysis of a full flexible shaft–disk–blades system with nonlinear energy sinks (NESs) using modified SAFE diagram

Nonlinear Flap-Wise Vibration Characteristics of Wind Turbine Blades Based on Multi-Scale Analysis Method

Aeromechanical Analysis of a Complete Wind Turbine Using Nonlinear Frequency Domain Solution Method

Optimized blade mass reduction of a 10MW-scale wind turbine via combined application of passive control techniques based on flap-edge and bend-twist coupling effects

Finite element modeling optimization of wind turbine blades from an earthquake engineering perspective

Multiple scales analysis of out-of-plane and in-plane vibrations of a wind turbine blade