Abstract:Offshore wind turbines (OWTs) are dynamically sensitive structures to low-frequency wind-wave loadings due to their low damping and high flexibility. This makes them vulnerable to unwanted vibrations in ocean environments. Therefore, there is a need to implement innovative vibration control devices to suppress undesired vibration and ensure their structural safety. A tuned mass damper (TMD) has been a promising solution to control excessive vibrations recently in OWTs due to higher efficiency and low installation cost. However, TMD performance in vibration mitigation of OWTs when placed at a nacelle is still challenging to investigate because the generator torque and pitch control may affect the dynamics of the overall system. In this paper, an optimal multiple TMD system is designed by placing TMDs at optimal locations along the tower, which are defined using the maximum amplitude of the displacements for the first three natural frequencies of the tower. In addition, extensive simulations are carried out with integrated OWT-TMD systems to find the optimal mass ratio values and quantity of the TMDs. The TMD system is also tuned for several scenarios, including operating, parked, and idling conditions under the combined wind-wave loadings. A numerical model of the 5 MW NREL OWT developed in OpenFAST is considered as the baseline in this study. The results show a root mean square (RMS) response reduction of 10.2% and 42% in fore-aft (FA) and side-side (SS) tower displacement with optimally designed multiple TMDs. Moreover, improved mitigation effects on tower base moment of RMS 43.6% and 20.8% are observed in orthogonal directions, respectively. The findings of this paper may have the potential for designing passive TMD systems for vibration reductions in OWT.

A novel two dimensional nonlinear tuned mass damper inerter and its application in vibration mitigation of wind turbine blade

Application of a new two dimensional nonlinear tuned mass damper in bi-directional vibration mitigation of wind turbine blades

Mitigation of In-Plane Vibrations in Large-Scale Wind Turbine Blades with a Track Tuned Mass Damper

Edgewise vibration suppression of multi-megawatt wind turbine blades using passive tuned mass dampers

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Out-of-plane vibration mitigation of wind turbine rotor blades using nonlinear energy sink

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

Pole-Placement-Based Calibration of an Electromagnetically Realizable Inerter-Based Vibration Absorber (IDVA) for Rotating Wind Turbine Blades

Wind-induced vibration absorption using inerter-based double tuned mass dampers on slender structures

Vibration mitigation in offshore wind turbine under combined wind-wave-earthquake loads using the tuned mass damper inerter

Novel tuned mass dampers installed inside tower of spar offshore floating wind turbines

Adaptive bidirectional dynamic response control of offshore wind turbines with time‐varying structural properties

Study on a three-dimensional variable-stiffness TMD for mitigating bi-directional vibration of monopile offshore wind turbines

Modeling and Parameter Analysis of the OC3-Hywind Floating Wind Turbine with a Tuned Mass Damper in Nacelle

A tuned cable-inerter system for wind turbine blades vibration suppression

Edgewise vibration reduction of small size wind turbine blades using shunt damping

Nonlinear-memoryless-amplification behavior of bi-directional prestressed TMD for integrated vibration control of offshore wind turbine

Edgewise vibration control of wind turbine blades using roller and liquid dampers

Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems

Optimized design of multiple tuned mass dampers for vibration control of offshore wind turbines

Optimal Design of Tuned Mass Dampers With Variable Inerter and Damping