Abstract:Modern wind turbines are becoming taller and more slender to gather wind energy more efficiently and are increasingly installed in complex environments. Consequently, the new generations of wind turbines are prone to vibration-related problems, making the development of vibration control strategies important. Various pitch angle control methods and dynamic vibration absorbers (DVAs) have been proposed recently to reduce the aerodynamic forces and structural responses of wind turbines. However, these approaches are often implemented independently, limiting the effectiveness of the overall control strategy. In this paper, pitch angle control and DVAs are integrated to improve the performance of wind turbines in a complex environment. Firstly, a simplified eight degree-of-freedoms (DOFs) model of the wind turbine is developed using Lagrange's Equation, and the wind turbine is linearized at specific operating points. The NREL 5MW wind turbine is taken as a benchmark model with strategies based on a proportional–integral (PI) pitch controller. Secondly, the pitch angle of each blade is adjusted by the combination of disturbance accommodating control (DAC) and linear quadratic gaussian (LQG) controller considering the wind speed disturbances. Additionally, the tuned mass damper with inerter (TMDI) is adopted to further suppress the structural vibrations . Thirdly, the passive and active methods of TMDl integrated with the pitch controller are investigated. Lastly, the effectiveness of the integrated control strategies is assessed when the wind turbines are subjected to earthquake and wind loads. The results indicate that combining active pitch control and TMDI can improve the power generation performance of wind turbines by reducing structural responses and damage-equivalent loads, and can also improve the power generation performance more effectively than when they are used separately.

Application of a new two dimensional nonlinear tuned mass damper in bi-directional vibration mitigation of wind turbine blades

A novel two dimensional nonlinear tuned mass damper inerter and its application in vibration mitigation of wind turbine blade

Mitigation of In-Plane Vibrations in Large-Scale Wind Turbine Blades with a Track Tuned Mass Damper

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Edgewise vibration suppression of multi-megawatt wind turbine blades using passive tuned mass dampers

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Out-of-plane vibration mitigation of wind turbine rotor blades using nonlinear energy sink

Adaptive bidirectional dynamic response control of offshore wind turbines with time‐varying structural properties

Nonlinear-memoryless-amplification behavior of bi-directional prestressed TMD for integrated vibration control of offshore wind turbine

Edgewise vibration reduction of small size wind turbine blades using shunt damping

Optimized design of multiple tuned mass dampers for vibration control of offshore wind turbines

Pole-Placement-Based Calibration of an Electromagnetically Realizable Inerter-Based Vibration Absorber (IDVA) for Rotating Wind Turbine Blades

Study on a three-dimensional variable-stiffness TMD for mitigating bi-directional vibration of monopile offshore wind turbines

Novel tuned mass dampers installed inside tower of spar offshore floating wind turbines

Modeling and Parameter Analysis of the OC3-Hywind Floating Wind Turbine with a Tuned Mass Damper in Nacelle

Edgewise vibration control of wind turbine blades using roller and liquid dampers

Wind-induced vibration absorption using inerter-based double tuned mass dampers on slender structures

Vibration mitigation of offshore structures subjected to wave and wind loads using optimum semi-active tuned mass damper inerter (SATMDI)

Vibration mitigation in offshore wind turbine under combined wind-wave-earthquake loads using the tuned mass damper inerter

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

Integrated control strategy for the vibration mitigation of wind turbines based on pitch angle control and TMDI systems