Abstract:Passive tuned mass dampers (TMDs) have been increasingly investigated for vibration control of wind turbines. However, TMD designs based on individual or a few operating conditions may result in insufficient consideration of the TMD's impact on wind turbines. For instance, the influence of end-stop collision forces on the main structural damage may be significantly underestimated, thereby affecting the overall lifecycle evaluation. In this study, focusing on large offshore fixed-bottom monopile wind turbines, we propose an integrated TMD design methodology taking the damper displacement constraints into full account. A comprehensive optimization of the passive omnidirectional pendulum-type TMD is conducted considering large number of operating conditions in the offshore environment. Next, a real-world application of the optimally designed TMD is performed for a 6450 kW monopile offshore wind on the Yellow Sea, China. We develop an on-site testing methodology and evaluation criteria for assessing the effectiveness of the TMD offshore. The results of resonance, emergency stop, operatingand reliability test conditions demonstrate the following: under the optimized TMD design taking into account all operating conditions, the TMD with a mass ratio of 1.56% can offer added damping in the fore-aft and side-side directions of the turbine, and provides the desired damping ratio of 1%; within a 4% frequency range around the design frequency, the TMD achieves effective vibration control; at rated power, the TMD achieves a reduction of more than 50% in the amplitude of the tower base side-side bending moment (Mx). The integrated TMD design with displacement constraints allows for the optimal TMD design across all operating conditions, thereby achieving superior overall vibration control and reduction in fatigue loads. The successful real-world application of the TMD based on integrated design methodology is of high value to the research community.

Edgewise vibration suppression of multi-megawatt wind turbine blades using passive tuned mass dampers

Mitigation of In-Plane Vibrations in Large-Scale Wind Turbine Blades with a Track Tuned Mass Damper

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Edgewise vibration control of wind turbine blades using roller and liquid dampers

A novel two dimensional nonlinear tuned mass damper inerter and its application in vibration mitigation of wind turbine blade

Passive structural control of offshore wind turbines

Using active tuned mass dampers with constrained stroke to simultaneously control vibrations in wind turbine blades and tower

Application of a new two dimensional nonlinear tuned mass damper in bi-directional vibration mitigation of wind turbine blades

Load reduction of a monopile wind turbine tower using optimal tuned mass dampers

Optimized design of multiple tuned mass dampers for vibration control of offshore wind turbines

Structural vibration control for the offshore floating wind turbine including drivetrain dynamics analysis

Mitigation of Side-to-side Vibration of a 10MW Monopile Offshore Wind Turbine under Misaligned Wind and Wave Conditions by an Active Torque Control

Vibration control of offshore wind turbines with a novel energy-adaptive self-powered active mass damper

Adaptive bidirectional dynamic response control of offshore wind turbines with time‐varying structural properties

Integrated design and real-world application of a tuned mass damper (TMD) with displacement constraints for large offshore monopile wind turbines

Optimized blade mass reduction of a 10MW-scale wind turbine via combined application of passive control techniques based on flap-edge and bend-twist coupling effects

Vibration suppression of offshore wind turbine foundations using tuned liquid column dampers and tuned mass dampers

Integrated control strategy for the vibration mitigation of wind turbines based on pitch angle control and TMDI systems

Structural Vibration Suppression of Wind Turbine Based on Dynamic Vibration Absorption

Coupled modeling and structural vibration control for floating offshore wind turbine