Abstract:Hybrid fillers to build an efficient thermal conductivity network. Traditional integrated circuit (IC) packaging materials and printed circuit board substrate materials suffer from several limitations including low thermal conductivity, high coefficient of thermal expansion (CTE), and poor dielectric properties. Although significant efforts have been made to enhance these properties, achieving a single composite system with simultaneous high thermal conductivity, extremely low CTE, and dielectric loss remains a formidable task. In this study, we propose a hybrid polymer composite system that addresses these challenges. Our approach involves utilizing a thermosetting polyphenylene oxide (PPO) as the resin matrix, while incorporating boron nitride (BN) sheets with high thermal conductivity and alumina (Al2O3) spheres with favorable fluidity as fillers. To optimize the composite properties, the filler surfaces are modified using dopamine and silane coupling agents, ensuring proper interface control. The composites exhibit significant improvements in thermal conductivity, reduced dielectric loss and CTE, while maintaining excellent processibility. Specifically, with a composition of 25 vol% BN and 25 vol% Al2O3, the thermal conductivity of the composite reaches 2.18 W·m−1 K−1, surpassing neat PPO resin by a factor of 10.9. Simultaneously, the CTE decreases from 2.27% to 1.18% between 50 and 260°C, and the dielectric loss reduces from 0.0024 to 0.0011 at 10 GHz, as compared to neat PPO resin. Highlights The reported novel hybrid composite offers a promising solution to the limitations of traditional IC packaging materials. The reported hybrid composite exhibits significantly improved thermal conductivity, ultralow dielectric loss, and reduced coefficient of thermal expansion, while maintaining excellent processibility. The thermal conductivity of the composites reaches 2.18 W·m−1 K−1, surpassing that of the neat resin by a factor of 10.9, meanwhile the dielectric loss is as low as 0.0011 at 10 GHz, which is extremely difficult to achieve simultaneously for thermosetting polymer composites. Synergetic effects were realized with the hybridization of fillers with different dimensionality, and proper filler surface modification.

Thermal conductivity of polypropylene/aluminum oxide nanocomposites prepared based on reactor granule technology

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Properties and effect of preparation method of thermally conductive polypropylene/aluminum oxide composite

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Thermally Conductive Polypropylene/Graphite/Carbon Fiber Composites

The thermal conductivity of 3D network reinforced polypropylene matrix composites was constructed by the pickering‐like emulsion method

Enhancement of electrical and thermal conductivity of polypropylene by graphene nanoplatelets

Polymer Composite with Enhanced Thermal Conductivity and Insulation Properties through Aligned Al2O3 Fiber

Enhanced thermal conductivity of PP hybrid films induced by filler orientation and laminated structure

Preparation of CNTs/PP@Gr composites with a segregated structure and enhanced electrical and thermal conductive properties by the Pickering emulsion method

Preparation of polypropylene-based thermally conductive composites via multiple injection compression molding method

The Use of Polyimide-Modified Aluminum Nitride Fillers in AlN@PI/Epoxy Composites with Enhanced Thermal Conductivity for Electronic Encapsulation

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Thermoplastic polypropylene/aluminum nitride nanocomposites with enhanced thermal conductivity and low dielectric loss

Polypropylene nanocomposites produced by in‐situ grafting of maleic anhydride using different mixing procedures

A double mixing process to greatly enhance thermal conductivity of graphene filled polyamide 6 composites

A Trade-off Study Toward Highly Thermally Conductive and Mechanically Robust Thermoplastic Composites by Injection Moulding

One-step alkyl-modification on boron nitride nanosheets for polypropylene nanocomposites with enhanced thermal conductivity and ultra-low dielectric loss

Polyphenylene oxide/boron nitride–alumina hybrid composites with high thermal conductivity, low thermal expansion and ultralow dielectric loss

Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing