Abstract:A general method is presented for spherical surface testing with unknown phase shifts based on a physical model of the interferometer cavity, which describes the phase shifts taking into account the rigid cavity motions and the radial imaging distortion of the interferometer. The captured interferograms are processed frame by frame with the regularized frequency-stabilizing method, so as to get the phase shifts between the frames. These phase shift data are subsequently fitted, and the initial estimations for the wavefront, direct current and interference contrast terms are calculated by the least-squares method. Specially, a simple way is proposed to find reasonable initial guess for numerical aperture (NA) of the test beam (when NA is unknown), so as to ensure the effectiveness of the above phase shift fitting procedure. Then, the wavefront result is further refined in an iterative way, by fitting the sequence of interferograms to the physical model of the interferometer cavity with the linear regression technique. Finally, the wavefront result related to the actual surface profile is retrieved after removing the aberrations due to the surface misalignment and the imaging distortion. Both simulations and experiments with the ZYGO interferometer have been carried out to validate the proposed method, with experimental accuracies better than 0.004λ RMS achieved. The proposed method provides a feasible way to spherical surface testing without the use of any phase-shifting devices, while retaining good accuracy and robust convergence performance.

Angular phase-shifting interferometry for surface shapes measurement using vortex beam

Axial nanodisplacement measurement based on the double-helix point spread function generated using radially polarized beams with vortex phase modulation

Research on Two Optical Methods for Aspheric Measurement

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

The Position Shifting of Frequency Spectrum of Fourier Transform in the Application of Aspheric Surface Testing

Fast measurement spherical surface and fast patching up aspherical surface

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Interferometric Spherical Surface Testing with Unknown Phase Shifts

Phase measuring deflectometry for convex aspheric surface measurement

A Vibration Compensation Method Based on White-light Wavelength Scanning Interferometry

Exact surface measurement based on phase error insensitive method for white-light scanning interferometer

Real-time Phase Measurement of Optical Vortices Based on Pixelated Micropolarizer Array.

Co-phase quantization and adjustment of segmented mirrors based on dual-wavelength vortex interference

Nanoscale surface metrology with a liquid crystal-based phase-shifting angular shearing interferometer

Synchronous Phase-Shifting Interference for High Precision Phase Imaging of Objects Using Common Optics

Implementation of accurate phase shift in Fizeau interferometer

Femtosecond Laser-Based Phase-Shifting Interferometry for Optical Surface Measurement.

Micro-displacement measurement of optical interference with two-ring conjugated vortices

Accuracy improvement of surface measurement through phase correction in spectrally resolved interferometer

Multiple-surface Interference Fringes Analysis Basing on Wavelength-Modulated Phase Shifting Interferometry

Dynamic Phase Measurement based on Two-step Phase-shifting Interferometry with Geometric Phase Grating