Abstract:Larger-sized primary carbides lead to stress concentration during the application of H13 hot-work die steel, resulting in microcracks and fatigue failure. Rare earth was usually added to modify the carbides and inclusions. The existing literature is reviewed on the effect of rare earth on primary carbides in H13 steel. A comprehensive review on the effect of rare earth on the characteristics of primary carbides, i.e., number, size, morphology, and thermal stability in H13 steel, was done. The precipitation mechanism and nucleation of primary carbides with rare earth were summarized. The position and form of rare earth in steel and their effects on alloying elements segregation were reviewed. The addition techniques of rare earth in H13 steel were compared, and the prospects for other uncommon rare earth and emerging technology were present. Based on the current references, it can be known that adding rare earth facilitated refined and dispersed primary carbides. The size of primary carbides would be reduced, and their morphology would be improved because the rare earth inclusions formed in H13 steel can act as nucleation cores for γ-Fe or δ-Fe, refining the dendritic structure. Besides, the number of primary carbides at grain boundaries would be significantly reduced. However, rare earth had little impact on thermal stability. The nucleation of primary carbides tended to be inhibited due to the modification of inclusions by rare earth which were likely to be nucleation cores for primary carbides. Rare earth had been reported to affect the mechanism and process of primary carbide precipitation. Additionally, the addition of rare earth can inhibit the segregation of alloying elements and carbon diffusion by calculation. Thus, laboratory experiments and theoretical calculations need to be conducted to study the states and evolution of rare earth steels.

Heterogeneous nucleation of carbides attached to Y2O3 in Y-modified H13 steel

The carbides, tensile properties, and work-hardening behavior of annealed H13 die steels with varied yttrium contents

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

Effect of rare earth on primary carbides in H13 die steel and their addition method: a review

Effects of yttrium on the microstructures, internal fraction and martensitic transformation in H13 die steel

Effects of rare-earth yttrium on crystallization and magnetic properties of Fe71 .4Si13B9.6Mo2Cr1Cu1P2nanocrystalline alloy

The Effect of Rare Earth Y on the Inhibitor Precipitation Behavior of Strip‐Cast Grain‐Oriented Silicon Steel

Effect of Yttrium on Inclusion and Eutectic Carbide in D2 Cold Working Die Steel

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Carbide Precipitation Behavior of High‐Alloy Steel During Solidification and Cooling Process

High-throughput search for RE (La, Ce and Y) contained stoichiometric compound in steels

A comparative study on the oxidation behavior of Y-, Hf- and YHf-doped NiCoCrAl alloys: effect of reactive elements

Effect of Spheroidizing Annealing on the Carbide Precipitation Behavior of Cr-Mo-V-W Hot Work Die Steels

Influence of Aluminum and Rhenium on the Isothermal Oxidation Behavior of CoNiCrAlY Alloys

Ab-initio molecular dynamics study of heterogeneous nucleation at the liquid-Y/α-Al2O3 interface

Crystallographic Calculations and First-Principles Calculations of Heterogeneous Nucleation Potency of γ-Fe on La2O2S Particles

Morphology and Distribution of Primary Carbides in Forged Cr-Ni-Mo-V/Nb Steel

Segregation of Yttrium at the Mg/MgO Interface in an Mg-0.5Y Alloy

The effect of nickel on the carbide precipitation behavior in Cr–Mo–V hot-working die steel

The reactive element effect: A first-principles study on CoCrFeNi high entropy alloy