Abstract:Abstract Nitrides, carbides, and carbonitrides of transition metal elements like Zr, W, Ti, etc. are generally employed to produce hard coatings. Zirconium-based hard coatings have shown useful applications in the areas of tribology, biomedicine and electrical due to their high thermal stability, hardness, biocompatibility, good erosion, wear, and corrosion resistance. In this study, we created homogeneous and tenacious nanostructured hard coatings based on Zr with good mechanical properties. The magnetron sputter deposition technique was utilized to coat stainless steel 316L substrates with multilayers of Zr/ZrN and ZrN/ZrCN with individual layer thicknesses of 250 and 500 nm for each coating composition. The deposition conditions were adjusted to create two different coating thicknesses of 2 and 3 μm. The thickness of the coating was confirmed using Calotest and the coatings’ morphology and elemental composition were determined utilizing the atomic force microscope and scanning electron microscope equipped with energy dispersive x-ray spectrometer. Coating thickness and adhesion were measured using cross-sectional samples and XRD was utilized to analyze the coatings structure. Nanoindenter was employed to determine the instrumental nanoindentation hardness and elastic modulus. The influence of coating thickness on tribological behavior was further investigated using the ratio of nanohardness-to-elastic modulus (H/E). No evidence of decohesion was observed at the substrate/coatings interface, and the grains of all the coatings were observed to show columnar growth which were homogeneous, compact and dense. The grains of the ZrN/ZrCN coatings were observed to be denser, finer and more compact compared to those of the Zr/ZrN coatings. Correspondingly, higher hardness, modulus and H/E values were exhibited by ZrN/ZrCN than Zr/ZrN coatings. This suggests that the ZrN/ZrCN coatings are capable of exhibiting better wear resistance and fracture toughness. The coatings developed in this investigation are anticipated to be suitable for applications in tribology due to their excellent hardness and H/E properties.

Synthesis of Multilayer Nanostructures Hf–Ti–N from the Plasma Phase

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

(AlCrNbSiTi)N/TiN multilayer films designed by a hybrid coating system combining high-power impulse magnetron sputtering and cathode arc deposition

Preparation and Characterization of Multilayer NiTi Coatings by a Thermal Plasma Process

Synthesis of nanocrystalline titanium nitride coatings from the plasma of a composite-cathode arc discharge

Chemical, Structural, and Electrical Changes in Molecular Layer-Deposited Hafnicone Thin Films after Thermal Processing

Multiple Needle Cathodes Plasma Surface Alloying of Ti6Al4V with W-Mo-C-N

Reactive nitrogen plasma spray coating of titanium nitride: plasma torch design and coating analysis

Highly-Conformal TiN Thin Films Grown by Thermal and Plasma-Enhanced Atomic Layer Deposition

Suppression of Nickel Out-Diffusion from Porous Nickel-Titanium Shape Memory Alloy by Plasma Immersion Ion Implantation

In Vitro Corrosion Behavior of TiN Layer Produced on Orthopedic Nickel–titanium Shape Memory Alloy by Nitrogen Plasma Immersion Ion Implantation Using Different Frequencies

Fabrication, microstructures and optical reflectivity of TiAlN/NiCr composite coating

Low Temperature Deposition of TiN Using Tetrakis(dimethylamido)‐Titanium in an Electron Cyclotron Resonance Plasma Process

Preparation of ultra-thick, crack-free, titanium nitride coatings using a full-domain power-modulated laser

Effects of Plasma Polymerization on the Performance of Biomedical Titanium

Deposition, microstructure and nanoindentation of multilayer Zr nitride and carbonitride nanostructured coatings

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Fabrication of Nickel and Nickel Carbide Thin Films by Pulsed Chemical Vapor Deposition

Effect of C2h2 Flow Rate on the Deposition of Zr-Zrc-Zrc/Dlc Gradient Nano-Composite Film on Biomedical Niti Alloy

Plasma Bombardment-Induced Amorphization of (TiNbZrCr)Nx High-Entropy Alloy Nitride Films