Abstract:Thorium is very attractive as sustainable resource in nuclear industry for its large resource inventory, high potential conversion ratio in thermal reactors because of the produced 233U, and less amount of long life MA products. HTR-PM is a demonstration plant of the modular high temperature reactor with two pebble-bed cores of 250 MWth. In a series of previous works, the feasibility of maximizing thorium utilization and minimizing the refueling effort of uranium fissile under the framework of HTR-PM has been investigated. Two types of thorium-based fuelling strategies of in situ utilization in HTR-PM were discussed, namely the Th+ HEU (93% enriched) MOX fuel schemes and the Th+ LEU SEP (uranium and thorium are loaded into SEParate pebbles) schemes, respectively. In this work, further investigation was implemented, including comprehensive parametric analysis on both strategies mentioned above by implementing coupled neutronics and thermal-hydraulics calculations and transient analysis in accidental conditions. The analysis on MOX schemes reveals that the one can obtain further uranium ore saving with about 9% uranium atomic fraction in the MOX fuels as the C/HM ratio decreases, compared with the traditional LEU loading. This is mainly attributed to the reduction of core leakage when the heavy metal loading increases. However, as the C/HM ratio decreases, most of the safety features of HTR-PM are observed to get worse, especially the maximum fuel temperature after DLOFC accident, which restricts the improvement of uranium ore saving. The optimized uranium ore saving is about 20 kg/GWd, corresponding to the thorium loading requirement about 10 kg/GWd, with far insufficient utilization fraction of thorium fuel up to 6% and relatively high-level residual 233U in spent fuels of about 0.2 kg/GWd. On the other hand, one can obtain superior performance of in situ utilization of thorium in the SEP schemes if the thorium residence time is lengthened sufficiently. A series of SEP schemes of 7g heavy metal loading per pebble are investigated, with varied uranium to thorium ratio and thorium discharge burn-up, as well as fixed uranium discharge burn-up of 90 GWd/tHM. When the ratio of uranium to thorium is set as 12: 3 and the thorium discharge burn-up goes as high as 200 GWd/tHM, the uranium ore saving for SEP schemes can reach about 10 kg/GWd, compared with the LEU loading scheme. Although this saving is smaller than the MOX case, the thorium loading requirement decreases dramatically with the increased thorium discharge burn-up, maximally one order of magnitude lower than the MOX schemes, indicating that the cost of thorium fuel can be minimized with relatively considerable uranium loading saving. The superior performance of the SEP scheme can be mainly attributed to the sufficient burning of thorium fuel, with maximum in-core utilization of thorium of more than 20%. It is concluded that the SEP schemes are better choices for in situ utilization of thorium and minimizing the uranium loading requirement than the MOX schemes.

Feasibility of Converting NuScale SMRs from UO2 to Mixed (Pu,Th)O2 and (U,Th)O2 Cores: A Parametric Study of the Seed-Blanket Fuel Assembly

Neutronic optimization of thorium-based fuel configurations f or minimizing slightly used nuclear fuel and radiotoxicity In small modular reactors

Analysis of thorium-transuranic fuel deployment in a LW-SMR: A solution toward sustainable fuel supply for the future plants

A neutronic evaluation of a thorium-based molten salt breeder reactor

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Neutronic Design Study of a Small Modular IPWR Loaded with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Burn Up Study of an Innovative Natural Uranium-Thorium Fueled Reprocessing Free Fusion-Fission Hybrid Reactor Blanket with Closed Thorium-Uranium Fuel Cycle

AP-1000 fuel assembly performance with UO2 and UO2/U3Si2 fuels and silicon carbide cladding from the viewpoint of neutronics

Neutronic Evaluation of LWR Based SMR with TRU Fuel and Comparison with Different Core Configuration of UO2 and MOX Fuel

Thorium utilization in a small modular molten salt reactor with progressive fuel cycle modes

STUDY ON CRITICALITY AND NEUTRONIC SAFETY PARAMETERS OF NUSCALE FUEL ASSEMBLY

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

Coupled Neutronics/Thermal Hydraulics Evaluation for Thorium Based Fuels in Thermal Spectrum Scwr

Low enriched uranium and thorium fuel utilization under once‐through and offline reprocessing scenarios in small modular molten salt reactor

Neutronic Study of a Combined Fast Fission FFHR and Thermal Fission FFHR System Using Thorium Bearing Molten Salt Fuel

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Neutronics And Thermal-Hydraulics Study On Maximizing In Situ Utilization Of U-233 In The Th-U5-Fueled Htr-Pm

Neutronic study of an innovative natural uranium–thorium based fusion–fission hybrid energy system

Preliminary Study on the Feasibility of Utilizing the Thermal Fissile Breeding Capability of the Th-U Fuel Cycle in Htr-Pm

A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits

Analysis of SMART reactor core with uranium mononitride for prolonged fuel cycle using OpenMC