Abstract:Thorium can supplement the current limited reserves of uranium. In current study, analyses are performed for thorium based fuels in thermal neutron spectrum Super Critical Water Reactor (SCWR). Thorium based fuels are studied in two roles. First role being replacement of conventional uranium dioxide fuel while the other being burner of Reactor Grade Plutonium (RG-Pu) in thermal neutron spectrum SCWR. Coupled neutron physics/thermal hydraulics analyses are performed due to large density variation of coolant over the active fuel length. Analyses reveal that thorium-uranium MOX fuels lead to smaller burnup values as compared to equivalent enriched uranium dioxide but possess the advantage of smaller excess reactivity at Beginning of Life (BOL). This can lead to savings in the form of Burnable Poisons (BP). Smaller fuel average temperature values are obtained for thorium-uranium MOX fuels as compared to uranium dioxide fuel option. Coated fuel option utilizing mixed thorium-uranium mono nitride fuel can help further decrease fuel average temperature values for thorium based fuels. U-233, produced in thorium uranium fuels, contribution towards fission energy produced is smaller as compared to plutonium produced in conventional uranium dioxide fuel. In terms of proliferation resistance, approximately 40% less quantity of plutonium is produced for thorium-uranium MOX fuels (for studied compositions) as compared to equivalent enriched uranium dioxide fuel. But, there is not much difference between the discharged plutonium vector compositions. Thorium–Plutonium based fuels lead to significantly harder spectrum which results in larger spread in radial power density and eventually causes larger values for thermal hydraulic parameters like fuel and clad temperature. Due to almost no production of plutonium, thorium based fuels can be a very good option to burn RG-Pu in thermal spectrum SCWR. Thorium based fuels destroyed almost 74% initially loaded RG-Pu as compared to 60% for uranium based MOX. HEU based thorium fuels can be a very good option for replacing conventional uranium dioxide fuels as very small quantities of plutonium is produced. This option, although, has regulatory issues due to use of HEU material.

Neutronic Evaluation of LWR Based SMR with TRU Fuel and Comparison with Different Core Configuration of UO2 and MOX Fuel

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Neutronic analysis of sodium‐cooled fast reactor design with different fuel types using modified CANDLE shuffling strategy in a radial direction

Burnup analysis for HTR-10 reactor core loaded with uranium and thorium oxide

Coupled Neutronics/Thermal Hydraulics Evaluation for Thorium Based Fuels in Thermal Spectrum Scwr

The use of MOX caramel fuel mixed with 241Am, 242mAm and 243Am as burnable absorber actinides for the MTR research reactors

Neutronic Design Study of a Small Modular IPWR Loaded with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Neutronic simulation of Traveling Wave Reactor (TWR) core in multi-cycles using Monte Carlo method

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Neutronic Analysis on Molten Salt Reactor (MSR) Using OpenMC Code With Variations of Geometry Core Fueled By LiF-BeF2-UF4

Neutronic analysis of fuel assembly loading patterns in small integrated pressurized water reactor core and fuel shifting strategy concept design

Calculations of neutron fluxes and isotope conversion rates in a thorium-fuelled MYRRHA reactor, using GEANT4 and MCNPX, Nuclear Engineering and Design

STUDY ON CRITICALITY AND NEUTRONIC SAFETY PARAMETERS OF NUSCALE FUEL ASSEMBLY

Evaluation of neutronic parameters for RITM-200 reactor unit considering (238U+235U)O2, (232Th+235U)O2 and (232Th+233U)O2 dispersed fuel using MCU-PTR

Effect of MOX fuel and the ENDF/B-VIII on the AP1000 neutronic parameters calculations by using MCNP6

Neutronics analysis of the spatial separation of fuel in lithium cooled space fast reactors

Analysis of thorium-transuranic fuel deployment in a LW-SMR: A solution toward sustainable fuel supply for the future plants

Neutronic Analysis of the Conceptual Molten Uranium Breeder Reactor Using MCNP and SCALE Tools

NEUTRON-PHYSICAL CALCULATION OF THE VVER-1000 ON MOX-FUELED REACTOR

Comparison of the neutronic properties of the (Th- 233 U)O 2 , (Th- 233 U)C, and (Th- 233 U)N fuels in small long-life PWR cores with 300, 400, and 500 MW th of power