Abstract:Thorium is very attractive as sustainable resource in nuclear industry for its large resource inventory, high potential conversion ratio in thermal reactors because of the produced 233U, and less amount of long life MA products. HTR-PM is a demonstration plant of the modular high temperature reactor with two pebble-bed cores of 250 MWth. In a series of previous works, the feasibility of maximizing thorium utilization and minimizing the refueling effort of uranium fissile under the framework of HTR-PM has been investigated. Two types of thorium-based fuelling strategies of in situ utilization in HTR-PM were discussed, namely the Th+ HEU (93% enriched) MOX fuel schemes and the Th+ LEU SEP (uranium and thorium are loaded into SEParate pebbles) schemes, respectively. In this work, further investigation was implemented, including comprehensive parametric analysis on both strategies mentioned above by implementing coupled neutronics and thermal-hydraulics calculations and transient analysis in accidental conditions. The analysis on MOX schemes reveals that the one can obtain further uranium ore saving with about 9% uranium atomic fraction in the MOX fuels as the C/HM ratio decreases, compared with the traditional LEU loading. This is mainly attributed to the reduction of core leakage when the heavy metal loading increases. However, as the C/HM ratio decreases, most of the safety features of HTR-PM are observed to get worse, especially the maximum fuel temperature after DLOFC accident, which restricts the improvement of uranium ore saving. The optimized uranium ore saving is about 20 kg/GWd, corresponding to the thorium loading requirement about 10 kg/GWd, with far insufficient utilization fraction of thorium fuel up to 6% and relatively high-level residual 233U in spent fuels of about 0.2 kg/GWd. On the other hand, one can obtain superior performance of in situ utilization of thorium in the SEP schemes if the thorium residence time is lengthened sufficiently. A series of SEP schemes of 7g heavy metal loading per pebble are investigated, with varied uranium to thorium ratio and thorium discharge burn-up, as well as fixed uranium discharge burn-up of 90 GWd/tHM. When the ratio of uranium to thorium is set as 12: 3 and the thorium discharge burn-up goes as high as 200 GWd/tHM, the uranium ore saving for SEP schemes can reach about 10 kg/GWd, compared with the LEU loading scheme. Although this saving is smaller than the MOX case, the thorium loading requirement decreases dramatically with the increased thorium discharge burn-up, maximally one order of magnitude lower than the MOX schemes, indicating that the cost of thorium fuel can be minimized with relatively considerable uranium loading saving. The superior performance of the SEP scheme can be mainly attributed to the sufficient burning of thorium fuel, with maximum in-core utilization of thorium of more than 20%. It is concluded that the SEP schemes are better choices for in situ utilization of thorium and minimizing the uranium loading requirement than the MOX schemes.

Investigating the possibility of using a mixture of thorium with different fissile materials as a fuel in TRISO particles for the PBMR-400 reactor

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

Improving the reactor safety aspects by the implementation of (Th-U 233 -Pu) fuel in a PWR assembly

Preliminary Study on the Feasibility of Utilizing the Thermal Fissile Breeding Capability of the Th-U Fuel Cycle in Htr-Pm

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

A proposed refueling scheme for the modular pebble bed reactor

Calculations of neutron fluxes and isotope conversion rates in a thorium-fuelled MYRRHA reactor, using GEANT4 and MCNPX, Nuclear Engineering and Design

Thorium fuel Performance: A comparative study on thorium's efficiency in PWR reactors

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Neutronics And Thermal-Hydraulics Study On Maximizing In Situ Utilization Of U-233 In The Th-U5-Fueled Htr-Pm

Neutron radiation characteristics of the IVth generation reactor spent fuel

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Analysis of thorium-transuranic fuel deployment in a LW-SMR: A solution toward sustainable fuel supply for the future plants

Evaluation of neutronic parameters for RITM-200 reactor unit considering (238U+235U)O2, (232Th+235U)O2 and (232Th+233U)O2 dispersed fuel using MCU-PTR

Physics Evaluation of Alternative Uranium-Based Oxy-Carbide Annular Fuel Concepts for Potential Use in Compact High-Temperature Gas-Cooled Reactors

Examination of the use of thorium-based fuel for burning minor actinides in European sodium cooled fast reactor

A neutronic evaluation of a thorium-based molten salt breeder reactor

Production of Pa-U Fuel with Proliferation Resistance by 14 MeV Neutron for Long-life Core

Coupled Analysis of Thorium-based Fuels in the High-Performance Light Water Reactor Fuel Assembly

Neutronic optimization of thorium-based fuel configurations f or minimizing slightly used nuclear fuel and radiotoxicity In small modular reactors

Neutronic examination of the U–Mo accident tolerant fuel for VVER-1200 reactors