Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

High Proton Conduction in the Octahedral Layers of Fully Hydrated Hexagonal Perovskite-Related Oxides

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

High proton conduction by full hydration in highly oxygen deficient perovskite

Use of Interplay between A‐Site Non‐Stoichiometry and Hydroxide Doping to Deliver Novel Proton‐Conducting Perovskite Oxides

Superprotonic Conductivity in Hexagonal and Tetragonal Cesium Hydroxide Hydrate

High-Entropy Perovskite Electrolyte for Protonic Ceramic Fuel Cells Operating below 600 °C

Novel Chemically Stable Ba3Ca1.18Nb1.82-xYxO9-delta Proton Conductor: Improved Proton Conductivity through Tailored Cation Ordering

High proton conductivity within the ‘Norby gap’ by stabilizing a perovskite with disordered intrinsic oxygen vacancies

ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films

A protonated brownmillerite electrolyte for superior low-temperature proton conductivity

A Novel High‐Entropy Perovskite Electrolyte with Improved Proton Conductivity and Stability for Reversible Protonic Ceramic Electrochemical Cells (Adv. Funct. Mater. 17/2024)

Designing Optimal Perovskite Structure for High Ionic Conduction

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Low Temperature Fast Mixed OH−/H+ Ionic Conductor in Doped Strontium Cerates

Samarium and Yttrium Codoped BaCeO3 Proton Conductor with Improved Sinterability and Higher Electrical Conductivity

Mixed Conduction in A-Site Double-Perovskite Na1+xLa1-xZr2O6-δ Proton Conductors

2D Doping of Proton Conductors: BaZrO 3 ‐Based Heterostructures

Thermochemical Expansion and Protonic and Electronic Hole Conductivity of Grain Interior and Grain Boundaries in 10 Mole% Y-Substituted SrZrO3

High-Conductive Protonated Layered Oxides from H<sub>2</sub>O Vapor-Annealed Brownmillerites

Sintering, chemical stability and electrical conductivity of the perovskite proton conductors BaCe0.45Zr0.45M0.1O3-δ (M = In, Y, Gd, Sm)

Proton Transport in the Gadolinium-Doped Layered Perovskite BaLaInO4