Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

High proton conductivity within the ‘Norby gap’ by stabilizing a perovskite with disordered intrinsic oxygen vacancies

High proton conduction by full hydration in highly oxygen deficient perovskite

Enhancing Thermochemical Energy Storage Performance of Perovskite with Sodium Ion Incorporation

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Use of Interplay between A‐Site Non‐Stoichiometry and Hydroxide Doping to Deliver Novel Proton‐Conducting Perovskite Oxides

Correlating Proton Diffusion in Perovskite Triple-Conducting Oxides with Local and Defect Structure

Novel Chemically Stable Ba3Ca1.18Nb1.82-xYxO9-delta Proton Conductor: Improved Proton Conductivity through Tailored Cation Ordering

High Cationic Dispersity Boosted Oxygen Reduction Reactivity in Multi-Element Doped Perovskites

Protonic Conduction in the BaNdInO 4 Structure Achieved by Acceptor Doping

Mo-doping allows high performance for a perovskite cathode applied in proton-conducting solid oxide fuel cells

Realizing Metastable Cobaltite Perovskite Via Proton-Induced Filling of Oxygen Vacancy Channels

A protonated brownmillerite electrolyte for superior low-temperature proton conductivity

High Proton Conduction in the Octahedral Layers of Fully Hydrated Hexagonal Perovskite-Related Oxides

Improving Electrocatalytic Activity of Cobalt-Free Barium Ferrite-Based Perovskite Oxygen Electrodes for Proton-Conducting Solid Oxide Cells via Introducing A-Site Deficiency

Samarium and Yttrium Codoped BaCeO3 Proton Conductor with Improved Sinterability and Higher Electrical Conductivity

Optimizing the Proton Conductivity with the Isokinetic Temperature in Perovskite‐Type Proton Conductors According to Meyer–Neldel Rule

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

(La1-x Mx )2 (Nb0.45 Yb0.55 )2 O7-δ (M=Ca, Sr, Ba) Ionic Conductors Promoted by Foreign/Domestic Dual Acceptor-Doping Strategies

Mixed oxide ion–proton conductivity and the ionic migration mechanism in isolated tetrahedral LaVO4 by acceptor doping

New Understanding and Improvement in Sintering Behavior of Cerium‐Rich Perovskite‐Type Protonic Electrolytes

Factors controlling oxygen migration barriers in perovskites