High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells
Meng Wang,Yilong Hua,Yueyuan Gu,Yanru Yin,Lei Bi
DOI: https://doi.org/10.1016/j.ceramint.2023.11.104
IF: 5.532
2023-12-10
Ceramics International
Abstract:Sintering aids are commonly used to improve the sinterability of proton-conducting oxides, whereas the sintering aid elements are being used alone in previous research. In this study, a high-entropy design method for the BaCe 0.4 Zr 0.4 Y 0.2 O 3 (BCZY) proton-conducting oxides sintering aid is proposed. In contrast to the use of sintering aids such as Ni, Fe, Cu, Co, and Zn alone, the high-entropy design allows for the simultaneous use of all five elements, resulting in the new composition BaCe 0.4 Zr 0.4 Y 0.15 Ni 0.01 Cu 0.01 Co 0.01 Fe 0.01 Zn 0.01 O 3 (HE-BCZY). Compared to conventional BaCe 0.4 Zr 0.4 Y 0.15 M 0.05 O 3 (BCZYM, M = Ni, Cu, Co, Fe, Zn) materials, the sinterability of the new HE-BCZY material is significantly greater than that of BCZYM, despite the fact that the concentration of sintering aids is the same. Following sintering at 1300 °C, the HE-BCZY electrolyte membrane is completely dense. In addition, the HE-BCZY electrolyte has a higher conductivity than BCZYM. The low sintering temperature allows the successful preparation of proton ceramic fuel cells (PCFCs) with the HE-BCZY electrolyte, and the fuel cell reaches a high peak power density of 1218 mW cm −2 at 700 °C, which is much higher than that of PCFCs using BCZY-based electrolytes. In addition, the excellent chemical stability of HE-BCZY is maintained under both H 2 O and CO 2 conditions. Consequently, a fuel cell employing the HE-BCZY electrolyte operates without detectable degradation for 200 h. This study demonstrates that although the high-entropy design is seldom used for sintering aids of proton-conducting oxides, it is an intriguing and promising strategy for creating high-performance electrolyte materials with good sinterability, high conductivity, and excellent stability.
materials science, ceramics