Abstract:A site-specific xenon plasma focused ion beam preparation technique for microcantilever samples (1-20 µm width and 1:10 aspect ratio) is presented. The novelty of the methodology is the use of a chunk lift-out onto a clean silicon wafer to facilitate easy access of a low-cost probe type indenter which provides bending force measurement. The lift-out method allows sufficient room for the indenter and a line of sight for the electron beam to enable displacement measurement. An electroplated nanotwinned copper (NTC) was cut to a 3 × 3 × 25 µm microbeam and in situ mechanically tested using the developed technique. It demonstrated measured values of Youngs modulus of 78.7 ± 11 GPa and flow stress of 0.80 ± 0.05 GPa, which is within the ranges reported in the literature. LAY DESCRIPTION: In this paper a site specific method is present for making particularly small mechanical tests samples, of the order of 100th the size of a human hair. These small samples can then be used to determine the mechanical properties of the bulk material. Copper with a nano twinned grain structure is used as a test medium. Ion milling was used to cut the sample to shape and a micro probe was used for mechanical testing. Ion milling can cut away very small volumes of material as it accelerates ions at the surface of the sample, atomically machining the sample. Micro probes are a cost-effective small-scale load measurement devices, however, they require a large area for accessing the sample. The indenter requirements are a problem when making you samples with ion milling as ion millers are best at making small cuts. Our aim was to design a cutting strategy which reduces the amount of cutting required while allowing samples to be fabricated anywhere on the sample. We used a chunk lift out technique to remove a piece of material which is then welded to a wafer of silicon this gives sufficient space around the sample for ion milling and testing. The additional space allowed easy access for the probe. A 3 × 3 × 10 µm micro cantilever beam was cut out from copper, this beam was then bent. The force from bending and distance bent was measured and converted into Youngs modulus which is a measure of flexibility. The modulus value measured was comparable to the values reported in other papers.

Novel Method for the Preparation of Lamellas From Porous and Brittle Materials for In Situ TEM Heating/Biasing

Self-marked preparation of site-specific transmission electron microscope lamellae of nanodevices using focusing ion beam technique.

Advanced preparation of plan-view specimens on a MEMS chip for in situ TEM heating experiments

A handy method for high quality specimen preparation for chip-based in-situ transmission electron microscopy

Applications of the FIB lift-out technique for TEM specimen preparation

Ion-Induced Bending with Applications for High-Resolution Electron Imaging of Nanometer-Sized Samples

In-Plane Liftout and Push-to-Pull for In Situ Mechanical Testing of Irradiated Inconel X-750

Transmission electron microscopy sample preparation method for micrometer-sized powder particles using focused ion beam

Reducing curtaining effects in FIB/SEM applications by a goniometer stage and an image processing method

Focused ion beam preparation of microbeams for in situ mechanical analysis of electroplated nanotwinned copper with probe type indenters

Thickness and quality controlled fabrication of fluorescence-targeted frozen-hydrated lamellae

Focused-ion-beam stress introducing technology for micro/nano-fabrications

High-quality TEM specimen preparation for lithium-ion conducting solid electrolytes by low-energy ion milling

Xenon plasma focused ion beam lamella fabrication on high-pressure frozen specimens for structural cell biology

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

Effective preparation of low-melting solder materials for atom probe tomography

In Situ Sputtering From the Micromanipulator to Enable Cryogenic Preparation of Specimens for Atom Probe Tomography by Focused-Ion Beam

Preparing samples from whole cells using focused-ion-beam milling for cryo-electron tomography

Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography

Optimization of the In Situ Biasing FIB Sample Preparation for Hafnia-Based Ferroelectric Capacitor

Support-based transfer and contacting of individual nanomaterials for in-situ nanoscale investigations