Abstract:A novel atomic force microscope (AFM) operating in liquid is described in this article. The specially designed AFM probe involves a tip attached to a cantilever, a tip holder, and a circular Plexiglas window. When the probe dives into the fluid, a circular meniscus is established around the Plexiglas window, preventing the tip from being affected or destroyed by surface tension of the liquid. In this setup, the whole scanning probe and the sample can completely dive into fluid. Meanwhile, the probe tip scans over the sample surface when the instrument works. These advantages enable the instrument to scan comparatively large or heavy samples with a high speed. The highest scan rate is about 30 lines/s or 14 s for a 400 x 400-pixel, 3 x 3 Pin image. Using the new AFM, we carry out in-situ investigation of the formation processes of porous alumina during electrochemical anodic oxidation. A lead ring and an aluminum foil serve as cathode and anode, respectively. They are entirely immersed in the bath electrolyte, which is oxalic acid solution. During anodic oxidation, the AFM images of the sample surface are successively acquired without elevating the sample out of the solution. Experiments reveal that electrochemical reactions take place soon after the power supply is switched on, and with the progression of anodization, nanostructures of porous alumina gradually occur on the aluminum substrate, finally yielding ordered arrays of nanopores. As a typical example of applications, the results of this work show that the new AFM is an ideal and powerful tool for in-situ observation and study of materials or samples in aqueous solutions. (c) 2005 Wiley-Liss.Inc.

Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography

A versatile and reproducible cryo-sample preparation methodology for atom probe studies

Self-marked preparation of site-specific transmission electron microscope lamellae of nanodevices using focusing ion beam technique.

Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

Modern Focused-Ion-Beam-Based Site-Specific Specimen Preparation for Atom Probe Tomography

Optimizing site-specific specimen preparation for Atom Probe Tomography by using hydrogen for visualizing radiation-induced damage

In Situ Sputtering From the Micromanipulator to Enable Cryogenic Preparation of Specimens for Atom Probe Tomography by Focused-Ion Beam

Single-Wedge Lift-Out for Atom Probe Tomography Al/Ni Multilayers Specimen Preparation Based on Dual-Beam-FIB

Development of automated tip preparation for atom probe tomography by using script-controlled FIB-SEM

Fabrication of Specimens for Atom Probe Tomography Using a Combined Gallium and Neon Focused Ion Beam Milling Approach

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

Correlative Site-Specific Sample Preparation for Atom Probe Tomography on Complex Microstructures

In Situ Metallic Coating of Atom Probe Specimen for Enhanced Yield, Performance, and Increased Field-of-View

Nanoporous gold thin films as substrates to analyze liquids by cryo-atom probe tomography

In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view

Effective preparation of low-melting solder materials for atom probe tomography

Ion-Induced Bending with Applications for High-Resolution Electron Imaging of Nanometer-Sized Samples

Atomic layer deposited Al2O3 as a protective overlayer for focused ion beam preparation of plan-view STEM samples

An Automated Site-Specific Tip Preparation Method for Atom Probe Tomography Using Script-Controlled Focused Ion Beam/Scanning Electron Microscopy

Facilitating the systematic nanoscale study of battery materials by atom probe tomography through in-situ metal coating

Atomic Force Microscope in Liquid with A Specially Designed Probe for Practical Application