Abstract:Atom probe tomography (APT) is a powerful materials characterization technique capable of measuring the isotopically resolved three-dimensional (3D) structure of nanoscale specimens with atomic resolution. Modern APT instrumentation most often uses an optical pulse to trigger field ion evaporation-most commonly, the second or third harmonic of a Nd laser is utilized (∼λ = 532 nm or λ = 355 nm). Herein, we describe an APT instrument that utilizes ultrafast extreme ultraviolet (EUV) optical pulses to trigger field ion emission. The EUV light is generated via a commercially available high harmonic generation system based on a noble-gas-filled capillary. The centroid of the EUV spectrum is tunable from around 25 eV (λ = 50 nm) to 45 eV (λ = 28 nm), dependent on the identity of the gas in the capillary (Xe, Kr, or Ar). EUV pulses are delivered to the APT analysis chamber via a vacuum beamline that was optimized to maximize photon flux at the APT specimen apex while minimizing complexity. We describe the design of the beamline in detail, including the various compromises involved. We characterize the spectrum of the EUV light and its evolution as it propagates through the various optical elements. The EUV focus spot size is measured at the APT specimen plane, and the effects of misalignment are simulated and discussed. The long-term stability of the EUV source has been demonstrated for more than a year. Finally, APT mass spectra are shown, demonstrating the instrument's ability to successfully trigger field ion emission from semiconductors (Si, GaN) and insulating materials (Al2O3).

Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

Development of automated tip preparation for atom probe tomography by using script-controlled FIB-SEM

Optimizing site-specific specimen preparation for atom probe tomography by using hydrogen for visualizing radiation-induced damage

An Automated Site-Specific Tip Preparation Method for Atom Probe Tomography Using Script-Controlled Focused Ion Beam/Scanning Electron Microscopy

Full tip imaging in atom probe tomography.

Correlative Site-Specific Sample Preparation for Atom Probe Tomography on Complex Microstructures

Atom probe tomography using an extreme ultraviolet trigger pulse

Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography

In Situ Sputtering From the Micromanipulator to Enable Cryogenic Preparation of Specimens for Atom Probe Tomography by Focused-Ion Beam

A versatile and reproducible cryo-sample preparation methodology for atom probe studies

Modern Focused-Ion-Beam-Based Site-Specific Specimen Preparation for Atom Probe Tomography

A new approach to the determination of concentration profiles in atom probe tomography.

Sub-micrometer-scale Chemical Analysis by Nanosecond-Laser-induced Tip-Enhanced Ablation and Ionization Time-of-flight Mass Spectrometry

Three-dimensional nanoscale characterisation of materials by atom probe tomography

Single-Wedge Lift-Out for Atom Probe Tomography Al/Ni Multilayers Specimen Preparation Based on Dual-Beam-FIB

Fabrication of Specimens for Atom Probe Tomography Using a Combined Gallium and Neon Focused Ion Beam Milling Approach

Nanostructuring with Scanning Probe Microscope Tip Irradiated with Femtosecond Laser

Optimizing compositional and atomic-level information of oxides in atom probe tomography

The LaserFIB: new application opportunities combining a high-performance FIB-SEM with femtosecond laser processing in an integrated second chamber

The modular Atom Probe Concept