Abstract:Carbonized elastomer-based composites (CECs) possess a number of attractive features in terms of thermomechanical and electromechanical performance, durability in aggressive media and facile net-shape formability, but their relatively low ductility and strength limit their suitability for structural engineering applications. Prospective applications such as structural elements of micro-electro-mechanical systems MEMS can be envisaged since smaller principal dimensions reduce the susceptibility of components to residual stress accumulation during carbonization and to brittle fracture in general. We report the results of in situ in-SEM study of microdeformation and fracture behavior of CECs based on nitrile butadiene rubber (NBR) elastomeric matrices filled with carbon and silicon carbide. Nanostructured carbon composite materials were manufactured via compounding of elastomeric substance with carbon and SiC fillers using mixing rolling mill, vulcanization, and low-temperature carbonization. Double-edge notched tensile (DENT) specimens of vulcanized and carbonized elastomeric composites were subjected to in situ tensile testing in the chamber of the scanning electron microscope (SEM) Tescan Vega 3 using a Deben microtest 1 kN tensile stage. The series of acquired SEM images were analyzed by means of digital image correlation (DIC) using Ncorr open-source software to map the spatial distribution of strain. These maps were correlated with finite element modeling (FEM) simulations to refine the values of elastic moduli. Moreover, the elastic moduli were derived from unloading curve nanoindentation hardness measurements carried out using a NanoScan-4D tester and interpreted using the Oliver-Pharr method. Carbonization causes a significant increase of elastic moduli from 0.86 ± 0.07 GPa to 14.12 ± 1.20 GPa for the composite with graphite and carbon black fillers. Nanoindentation measurements yield somewhat lower values, namely, 0.25 ± 0.02 GPa and 9.83 ± 1.10 GPa before and after carbonization, respectively. The analysis of fractography images suggests that crack initiation, growth and propagation may occur both at the notch stress concentrator or relatively far from the notch. Possible causes of such response are discussed, namely, (1) residual stresses introduced by processing; (2) shape and size of fillers; and (3) the emanation and accumulation of gases in composites during carbonization.

Dynamic Fragmentation of Ceramics Based on Carbon and Silicon Carbide

Application of microtomography and image analysis to the quantification of fragmentation in ceramics after impact loading

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

The Fracture Stress of 8-Inch Silicon Carbide During the PVT Growth

A Shockless Plate-Impact Spalling Technique, Based on Wavy-Machined Flyer-Plates, to Evaluate the Strain-Rate Sensitivity of Ceramic Tensile Strength

Experimental and theoretical investigation of failure mechanism in Al 2 O 3 /SiC composite under plane shock waves

Rapid geometric characterization of ceramics fragments through split Hopkinson pressure bar tests

Abrasive wear behavior of Sialon ceramic

Deformation and Fracture of Corundum Ceramics with a Multilevel Pore Structure

Computational investigation of the dynamic response of silicon carbide ceramic under impact loading

Investigation of the Resistance to High-Speed Impact Loads of a Heterogeneous Materials Reinforced with Silicon Carbide Fibers and Powder

Study on Behavior of Dynamic Fracture in SiC Nanoparticles Reinforced Magnesium Matrix Composites

In Situ Investigation of Strain Localization in Sintered, Porous Segmented Alumina

Mechanisms of fragmentation of Al-W granular composites under dynamic loading

A high-rate, impact-driven biaxial fragmentation experiment for ductile materials

A Multi-Scale Approach for Phase Field Modeling of Ultra-Hard Ceramic Composites

Dynamic Compressive Strength and Fragmentation in Felsic Crystalline Rocks

Nanoductility induced brittle fracture in shocked high performance ceramics

The Analysis of Micro-Scale Deformation and Fracture of Carbonized Elastomer-Based Composites by In Situ SEM

Numerical modeling of dynamic response and microcracking in shock-loaded polycrystalline transparent ceramic

Molecular Dynamics Simulation of Thin Silicon Carbide Films Formation by the Electrolytic Method