Abstract:Background: Full-field, quantitative visualization techniques, such as digital image correlation (DIC), have unlocked vast opportunities for experimental mechanics. However, DIC has traditionally been a surface measurement technique, and has not been extended to perform measurements on the interior of specimens for dynamic, full-scale laboratory experiments. This restricts the use of DIC measurements, especially in the context of heterogeneous materials. Objective: The focus of this study is to develop a method for performing internal DIC measurements in dynamic experiments. The aim is to demonstrate its feasibility and accuracy across a range of stresses (up to 650MPa), strain rates ($10^3$-$10^6$ s$^{-1}$), and high-strain rate loading conditions (e.g., ramped and shock wave loading). Methods: Internal DIC is developed based on the concept of applying a speckle pattern at an inner-plane of a transparent specimen. The high-speed imaging configuration is then focused on the internal speckle pattern. During the dynamic experiment, in-plane, two-dimensional deformations are measured via correlation of the internal speckle pattern. Results: The internal DIC experimental technique is successfully demonstrated in both the SHPB and plate impact experiments. In the SHPB setting, the accuracy of the technique is excellent throughout the deformation regime, with measurement noise of approximately 0.2% strain. For plate impact experiments, the technique performs well, with error and measurement noise of 1% strain. Conclusion: The internal DIC technique has been developed and demonstrated to work well for full-scale dynamic high-strain rate and shock laboratory experiments, and the accuracy is quantified. The technique can aid in investigating the physics and mechanics of the dynamic behavior of materials, including local deformation fields around dynamically loaded material heterogeneities.

Deep indentation and puncture of a rigid cylinder inserted into a soft solid

An experimental study of the contact of a rounded rigid indenter with a soft material block

Experimental Observation of Near-Wall Effects During the Puncture of Soft Solids

Numerical and Experimental Studies of Deep Indentation on Single Crystals

Quantifying surface deformation around micrometer-scale indents by digital image correlation

Surface Effects on Cylindrical Indentation of a Soft Layer on a Rigid Substrate

Experimental investigation of deformation and failure mechanisms in rock under indentation by digital image correlation

Full-Field Indentation Damage Measurement Using Digital Image Correlation

Puncture mechanics of soft elastomeric membrane with large deformation by rigid cylindrical indenter

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

A Preliminary Two-Dimensional Palpation Mechanics for Detecting a Hard Inclusion by Indentation of a Soft Matrix Under Large Strain

Experimental investigation on surface deformation of soft half plane indented by rigid wedge

Deformation field in deep flat punch indentation and the persistence of dead-metal zones

Simulation of Deep Spherical Indentation Using Eulerian Finite Element Methods

Experimental Investigation on Deformation and Failure of Rock under Cyclic Indentation

Indentation processes in poly(methylmethacrylate). II. Cone indentation and deep punching

A Validation Approach for Quasistatic Numerical/Experimental Indentation Analysis in Soft Materials Using 3D Digital Image Correlation

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

Indentation of Irreversibly Compressible Material: Computer Simulation

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

Computational Indentation in Highly Cross-linked Polymer Networks