Abstract:Understanding the contact and friction of soft materials is vital for a wide variety of engineering applications including soft sealants and medical devices such as catheters and stents. While the mechanisms of friction between stiff materials have been extensively studied, the mechanisms of friction between soft materials are much less understood. Time dependent material responses, large deformations and fluid layers at the contact interface, common in soft materials, pose new challenges toward understanding friction of soft materials. This paper aims to characterize the three-dimensional (3D) contact interfaces in soft materials under large deformation and complex contact conditions. Specifically, we introduce a micro-indentation and visualization (MIV) system capable of investigating soft material contact interfaces with combined normal and shear loading. When combined with a laser scanning confocal microscope, the MIV system enables the acquisition of 3D image stacks of the deformed substrate and the indenter, under fixed normal and shear displacements. The 3D imaging data allows us to quantify the 3D contact profiles and correlate them with the applied normal and shear displacements. Using a spherical indenter and a hydrogel substrate as a model system, we demonstrate that the MIV system and the associated analysis techniques accurately measure the contact area under combined normal and shear loading. Although the limited speed of confocal scanning implies that this method is most suitable for quasi-static loading conditions, potential methods to increase the imaging speed and the corresponding trade-off in image resolution are discussed. The method presented here will be useful for future investigation of soft material contact and friction involving complex surface geometries.

An experimental study of the contact of a rounded rigid indenter with a soft material block

Multiscale Simulation Of Wedge Nanoindentation Based On The Repulsive Force-Field Approach

Experimental investigation on surface deformation of soft half plane indented by rigid wedge

A Validation Approach for Quasistatic Numerical/Experimental Indentation Analysis in Soft Materials Using 3D Digital Image Correlation

Quantifying surface deformation around micrometer-scale indents by digital image correlation

Numerical and Experimental Studies of Deep Indentation on Single Crystals

Full-Field Indentation Damage Measurement Using Digital Image Correlation

An Experimental Study on the Contact Problem of Spherical Indentation on the Anisotropic Elastic Half-Space Based on Imaging

Measuring Microscale In-Plane Indentation Displacement Field for Material Characterization

Three-Dimensional Microscale Imaging and Measurement of Soft Material Contact Interfaces Under Quasi-Static Normal Indentation and Shear.

Experimental investigation of deformation and failure mechanisms in rock under indentation by digital image correlation

Friction Effect on Micro-indentation Measurement with Different Indenters

Depth-sensing instrumented indentation with dual sharp indenters: stability analysis and corresponding regularization schemes

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

Square indentation on a soft elastomer layer with finite thickness

A new mark shearing technique for strain measurement using digital image correlation method.

Contact stiffness of the multi-indenter contact interface

Full-field Measurement of Deformation and Vibration using Digital Image Correlation

Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation

On the Determination of Reduced Young's Modulus and Hardness of Elastoplastic Materials Using a Single Sharp Indenter

Reconsideration of Contact Problem Between Rigid Spherical Indenter and Piezoelectric Half-Space