Abstract:High-temperature superconducting (HTS) tapes, coils, and magnets often experiences intricate quench instabilities and failures during high current-carrying operations, posing challenges to their practical applications. This study addresses the need for a measurement approach capable of monitoring multi-field signals in superconducting structures within cryogenic and extreme electromagnetic environments. We explore the application of distributed fiber optic sensing (DFOS) technology, specifically employing the optical frequency domain reflectometry (OFDR) scheme, which offers distinct advantages over traditional point-type electrical testing methods, particularly for superconducting materials and magnets. In this experimental study, we continuously track the quench evolution process in superconducting tapes using both bonded and stress-free fibers for real-time monitoring. A comprehensive analysis of the acquired temperature and thermoelastic strain profiles provides essential insights into the dynamic behavior of quench events. The findings demonstrate the effectiveness of DFOS in identifying and characterizing the onset and propagation of quenches. By arranging bonded and stress-free fibers in parallel on the HTS tape's surface, we successfully decouple the effects of strain-temperature cross-sensitivity, enabling the extraction of temperature and train profiles. The bonded fiber optic sensor demonstrates rapid sensitivity to the thermally quenched events. Temporal derivatives of voltage and thermal strain exhibit characteristic plateaus and slope changes during quenches, respectively. The voltage rate displays two plateaus corresponding to superconducting-to-normal transitions, while strain rates exhibit potential as criteria for identifying quench events in HTS materials. Moreover, DFOS outperforms traditional terminal average voltage measurement, capturing quench evolution tails from the initial point of quench until the complete transition of the segment into the normal state. This experiment provides a solid foundation for further exploration of the underlying quench mechanism.

Distributed Strain Measurements for a 5T Split NbTi Superconducting Magnet Based on Rayleigh Scattering Distributed Fiber

Preliminary Strain Measurement in High Field Superconducting Magnets With Fiber Bragg Grating

Investigation of real-time strain responses of the insulating system of superconducting magnets by using fiber Bragg grating sensors

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

Fabrication and Test of an 8-T Superconducting Split Magnet System with Large Crossing Warm Bore

Fiber Bragg Grating Sensor for Strain Sensing in Low Temperature Superconducting Magnet

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets

Application of Distributed Fiber Optic Strain Sensors to LMQXFA Cold Mass Welding

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Study on internal strain distribution of the high-field Nb3Sn superconducting accelerator magnets with homogenization theory

Strain analysis and preliminary test of an all-superconducting high-field magnet generating 32.4 T direct-current magnetic field

A New Testing Device for Bending Strain Effect on Superconducting Wires

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Fiber-optic diagnostic system for future accelerator magnets

Development of Strain Measurement in Superconducting Magnet Through Fiber Bragg Grating

Fabrication of A 10 Tesla Cryogen-Free Superconducting Magnet

Unraveling quench dynamics and real-time continuous detection in HTS Tapes through distributed fiber optic sensing

Numerical analysis on the mechanical behavior of a 5T superconducting magnet