Abstract:Optical strain sensors [optical fiber strain (OFS] based on optical frequency domain reflection (OFDR) are an optical sensor with great application value and the ability to achieve distributed detection. However, both the external ambient temperature and the strain contribute to the frequency shift of the Rayleigh scattering spectrum in the optical fiber during the measurement. This means that the problem of temperature compensation (TC) must be considered when detecting strain in the environment with temperature field, especially in high-temperature environment. In this article, a method of double-wire-based single optical fiber was proposed to aim at this problem, which makes one single fiber have two functions of TC and strain sensing at the same time. The contact strain sensing experiment was carried out on the conventional standard single-mode fiber (SMF)-128 polyimide-coated (PI) distributed OFS sensor (DOFSS) under high-temperature conditions (0 °C–300 °C). The TC for the strain measurement of optical fiber sensor-based OFDR was effectively realized by performing data fusion operation on the measurement results of TC and strain sensing, and the relationship between the temperature change rate and the compensation error rate (ER) was obtained. In addition, the noncontact fiber stretching sensing experiment under ultrahigh-temperature (50 °C–600 °C) conditions was carried out for the first time, which further verified the effectiveness of the method for the compensation of the fiber strain measurement error. Feasibility especially provides a simple and effective method for the application of strain measurement technology in high-temperature environment.

Advanced Fiber Optic Sensing for Cryogenic Simultaneous Temperature and Strain Measurement

Double-Wire-Based Single Distributed Optical Fiber Strain Sensing Method in High-Temperature Environment

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Simultaneous Measurement of Strain and Temperature Using A Hybrid Local and Distributed Optical Fiber Sensing System

Simultaneous Measurements of Distributed Temperature and Discrete Strain Based on Hybrid Raman/FBG System

Cascaded-cavity Fabry–Perot Interferometer for Simultaneous Measurement of Temperature and Strain with Cross-Sensitivity Compensation

Long-Range High Spatial Resolution Distributed Temperature and Strain Sensing Based on Optical Frequency-Domain Reflectometry

A high sensitive fiber-optic strain sensor with tunable temperature sensitivity for temperature-compensation measurement

Optimized Cryogenic FBG Sensitivity Coefficient Calibration for High-Precision Thermal Expansion Measurements

Distributed Temperature And Strain Discrimination With Stimulated Brillouin Scattering And Rayleigh Backscatter In An Optical Fiber

Strain and Temperature Discrimination Using Concatenated Fiber Grating Lasers

Simultaneous Measurement of Strain and Temperature Using Fabry–Pérot Interferometry and Antiresonant Mechanism in a Hollow-Core Fiber

Simultaneous Measurement of Strain and Temperature Based on Fiber Sensor with Vernier Effect

Simultaneous Strain and Temperature Fiber Grating Laser Sensor Based on Radio-Frequency Measurement

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Discrete amplified sensing of temperature and strain

High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Discrimination Between Strain And Temperature By Cascading Single-Mode Thin-Core Diameter Fibers

Distributed Optical Fiber Sensors for Monitoring of Civil Engineering Structures

Simultaneous measurement of temperature and strain: cross-sensitivity considerations

Temperature Insensitive Distributed Wide-dynamic-range Strain Sensing based on Polarization-Maintaining Photonic Crystal Fiber