Abstract:Addressing climate change constitutes one of the major scientific challenges of this century, and it is widely acknowledged that anthropogenic CO2 emissions largely contribute to this issue. To achieve the "net-zero" target and keep the rise in global average temperature below 1.5 °C, negative emission technologies must be developed and deployed at a large scale. This study investigates the feasibility of using membranes as direct air capture (DAC) technology to extract CO2 from atmospheric air to produce low-purity CO2. In this work, a two-stage hollow fiber membrane module process is designed and modeled using the AVEVA Process Simulation platform to produce a low-purity (≈5%) CO2 permeate stream. Such low-purity CO2 streams could have several possible applications such as algae growth, catalytic oxidation, and enhanced oil recovery. An operability analysis is performed by mapping a feasible range of input parameters, which include membrane surface area and membrane performance metrics, to an output set, which consists of CO2 purity, recovery, and net energy consumption. The base case for this simulation study is generated considering a facilitated transport membrane with high CO2/N2 separation performance (CO2 permeance = 2100 GPU and CO2/N2 selectivity = 1100), when tested under DAC conditions. With a constant membrane area, both membranes' intrinsic performances are found to have a considerable impact on the purity, recovery, and energy consumption. The area of the first module plays a dominant role in determining the recovery, purity, and energy demands, and in fact, increasing the area of the second membrane has a negative impact on the overall energy consumption, without improving the overall purities. The CO2 capture capacity of DAC units is important for implementation and scale-up. In this context, the performed analysis showed that the m-DAC process could be appropriate as a small-capacity system (0.1-1 Mt/year of air), with reasonable recoveries and overall purity. Finally, a preliminary CO2 emissions analysis is carried out for the membrane-based DAC process, which leads to the conclusion that the overall energy grid must be powered by renewable sources for the technology to qualify within the negative emissions category.

CO 2 -Selective Membrane Reactor Process for Water-Gas-Shift Reaction with CO 2 Capture in a Coal-Based IGCC Power Plant

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Understanding the performance of membrane for direct air capture of CO2

Field-Scale Testing of a High-Efficiency Membrane Reactor (MR)—Adsorptive Reactor (AR) Process for H2 Generation and Pre-Combustion CO2 Capture

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

CO2 Capture by Using a Membrane-absorption Hybrid Process in the Nature Gas Combined Cycle Power Plants

Influences Of Co2 Capture On Coal Water Slurry Igcc Performance

Simultaneous Carbon Capture and Reuse Using Catalytic Membrane Reactor in Water-Gas Shift Reaction

Capture by Using a Membrane-Absorption Hybrid Process in 1 the Nature Gas Combined Cycle Power Plants

Study on the Mechanism and Energy Consumption of CO2 Regeneration Process by Membrane Electrolysis

Simulation of the Membrane Process of CO2 Capture from Flue Gas via Commercial Membranes While Accounting for the Presence of Water Vapor

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Study on process intensification of pre combustion CO capture

Biocatalytic Membranes for Carbon Capture and Utilization

Insight and Comparison of Energy-efficient Membrane Processes for CO2 Capture from Flue Gases in Power Plant and Energy-intensive Industry

Process Operability Analysis of Membrane-Based Direct Air Capture for Low-Purity CO2 Production

Comparative Investigation of Different CO2 Capture Technologies for Coal to Ethylene Glycol Process

Waste CO 2 capture and utilization for methanol production via a novel membrane contactor reactor process: Techno-economic analysis (TEA), and comparison with other existing and emerging technologies

Membrane Cascade Type of «Continuous Membrane Column» for Power Plant Post-Combustion Carbon Dioxide Capture Part 1: Simulation of the Binary Gas Mixture Separation

Analyses of hot/warm CO2 removal processes for IGCC power plants