Abstract:Ti-Cu sintered alloys have shown good antibacterial abilities. However, the sintered method (powder metallurgy) is not convenient to produce devices with a complex structure. In this paper, Ti-Cu alloys with 2.0, 3.0 and 4.0 wt.% Cu were prepared in an arc melting furnace and subjected to different heat treatments: solid solution and ageing, to explore the possibility of preparing an antibacterial Ti-Cu alloy by a casting method and to examine the effect of Cu content. Phase identification was conducted on an XRD diffraction meter, and the microstructure was observed by a metallographic microscope, a scanning electron microscope (SEM) with energy disperse spectroscopy (EDS) and transmission electron microscopy (TEM). Microhardness and the compressive property of Ti-Cu alloys were tested, and the corrosion resistance and antibacterial activity were assessed in order to investigate the effect of the Cu content. Results showed that the as-cast Ti-Cu alloys exhibited a very low antibacterial rate against Staphylococcus aureus (S. aureus). Heat treatment improved the antibacterial rate significantly, especially after a solid and ageing treatment (T6). Antibacterial rates as high as 90.33% and 92.57% were observed on Ti-3Cu alloy and Ti-4Cu alloy, respectively. The hardness, the compressive yield strength, the anticorrosion resistance and the antibacterial rate of Ti-Cu alloys increased with an increase of Cu content in all conditions. It was demonstrated that homogeneous distribution and a fine Ti2Cu phase played a very important role in the mechanical property, anticorrosion and antibacterial properties. Furthermore, it should be pointed out that the Cu content should be at least 3 wt.% to obtain good antibacterial properties (>90% antibacterial rate) as well as satisfactory mechanical properties.

Biological corrosion behaviour and antibacterial properties of Ti-Cu alloy with different Ti2Cu morphologies for dental applications

Antibacterial Mechanisms: Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys Againststaphylococcus Aureus(adv. Healthcare Mater. 5/2016)

Enhancing the In Vitro Tribocorrosion Resistance of Titanium Alloy by Precipitation of Nano-Ti2Cu Phases

Construction of a Rough Surface with Submicron Ti2Cu Particle on Ti-Cu Alloy and Its Effect on the Antibacterial Properties and Cell Biocompatibility

Topography-dependent Antibacterial, Osteogenic and Anti-Aging Properties of Pure Titanium

Biocorrosion properties of Ti–3Cu alloy in F ion-containing solution and acidic solution and biocompatibility

Characteristics of novel Ti-40Nb-xCu alloy and surface treatment with superior antibacterial property and biocompatibility using micro-arc oxidation for dental implants

Effects of Surface Roughening on Antibacterial and Osteogenic Properties of Ti-Cu Alloys with Different Cu Contents

Design of a new Ti-Mo-Cu alloy with excellent mechanical and antibacterial properties as implant materials

Enhanced Corrosion Resistance and Biofilm Inhibition of Functionally Graded TC4/TC4-5Cu Fabricated by Selective Laser Melting against Streptococcus mutans

Bio-corrosion behavior, antibacterial property and interaction with osteoblast of laser in-situ fabricated Ti-Si-Cu coatings on Ti-6Al-4V alloy

Biocompatibility, corrosion resistance and antibacterial activity of TiO2/CuO coating on titanium

An Investigation of the Antibacterial Ability and Cytotoxicity of A Novel Cu-Bearing 317l Stainless Steel

Mechanisms of Hierarchical Topographies Tuning Bacteria and Cell Biological Responses to the Surfaces of Pure Titanium and Cu-Bearing Titanium Alloy

Construction of a TiO2/Cu2O multifunctional coating on Ti-Cu alloy and its influence on the cell compatibility and antibacterial properties

Enhanced mechanical, bio-corrosion, and antibacterial properties of Ti Cu alloy by forming a gradient nanostructured surface layer

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

Effect of Cu content on the properties of laser powder bed fused biomedical titanium alloys

Characteristics of novel Ti–10Mo-xCu alloy by powder metallurgy for potential biomedical implant applications

Optimization of mechanical properties, biocorrosion properties and antibacterial properties of as-cast Ti-Cu alloys

Enhanced antibacterial activity of Ti-Cu alloy by selective acid etching