Abstract:Strong and ductile precipitation-hardening face-centered cubic medium-entropy alloys (MEAs) are potential structural material candidates for cryogenic applications, which, however, are rarely reported in the field of additive manufacturing. In this work, we develop a high-performance (CoCrNi)94Al3Ti3 MEA via additive manufacturing and age hardening. Superior tensile strength-ductility combinations, in comparison to other reported additively manufactured face-centered cubic metals, are achieved at both ambient (293 K) and cryogenic (103 K) temperatures. This is attributed to the hierarchical microstructure with a high degree of heterogeneity in terms of grain size, cellular substructure and characteristics of nanoprecipitates (L12 phase). Such microstructure feature leads to a higher ambient-temperature yield strength (921.1 MPa) and ultimate tensile strength (1346.4 MPa) than the as-printed sample that possesses a homogeneous microstructure. Moreover, the precipitate shearing mechanism, hetero-deformation induced hardening effect and deformation-induced stacking faults-based substructure evolution jointly result in a high and persistent strain hardening ability, which ensures a high ductility (27.2% at ambient temperature). The testing at the cryogenic temperature promotes the efficiency of hetero-deformation induced hardening and the formation of stacking faults, leading to an excellent strength-ductility combination (tensile strength 1702.9 MPa and ductility 25.4%). However, unlike the simultaneous increment of strength and ductility for the as-printed sample when the testing temperature decreases from 293 K to 103 K, the ductility of the age-hardened sample at different temperatures only changes slightly. This feature is related to the severe strain/stress concentrations developed within the heterogeneous microstructure of the age-hardened sample at 103 K. Our approach of introducing coherent nanoprecipitates in the additively manufactured microstructure provides a new insight into the development of high-performance MEAs for cryogenic applications.

Corrosion Resistance Enhancement of Selective Laser Melted Cost‐Effective Interstitial Medium‐Entropy Alloy via Deep Cryogenic Treatment

Corrosion performance of selective laser-melted equimolar CrCoNi medium-entropy alloy vs its cast counterpart in 3.5 wt% NaCl

Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing

Cryogenic mechanical behavior of a FeCrNi medium-entropy alloy fabricated by selected laser melting

Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment

Microstructure, corrosion resistance and wear properties of laser directed energy deposited CrCoNi medium-entropy alloy after cyclic deep cryogenic treatment

Effect of annealing on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion additive manufacturing

Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance

A comparison of the mechanical and corrosion behavior of Fe49.5Mn25Cr15Ni10C0.5 medium-entropy alloy with its subsystems steels

Beneficial Effects of Deep Cryogenic Treatment on Mechanical Properties of Additively Manufactured High Entropy Alloy: Cyclic Vs Single Cryogenic Cooling

Microstructure and corrosion behavior of Co-free FeCrNiSi0.4 medium entropy alloy coating fabricated by laser cladding

Densification, Microstructure and Anisotropic Corrosion Behavior of Al-Mg-Mn-Sc-Er-Zr Alloy Processed by Selective Laser Melting

3D printed N-doped CoCrFeNi high entropy alloy with more than doubled corrosion resistance in dilute sulphuric acid

Corrosion behavior and mechanism of FeCrNi medium entropy alloy prepared by powder metallurgy

Ultrastrong and ductile additively manufactured precipitation-hardening medium-entropy alloy at ambient and cryogenic temperatures

The Effects of Heat Treatment on the Microstructure and Mechanical Properties of a Selective Laser Melted AlCoFeNi Medium-Entropy Alloy

Tailoring recrystallization for optimum mechanical combination in Ni-rich medium-entropy alloy via simplified thermomechanical treatment

Effects of Post Annealing on the Microstructure, Precipitation Behavior, and Mechanical Property of a (cocrni)94al3ti3 Medium-Entropy Alloy Fabricated by Laser Powder Bed Fusion

Strengthening of Fe 50 Mn 25 Ni 10 Cr 15 Medium‐Entropy Alloys by Mo Addition for Cryogenic Applications

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

Effects of tempering treatment on structural evolution and electrochemical properties of laser cladded NiAlCrZrMo medium–entropy alloy coating by DFT calculation