Abstract:The main purpose of this study is to determine, via a three dimensions Finite Element analysis (FE), the stress and strain fields at the inner surface of a tubular specimen submitted to thermo-mechanical fatigue. To investigate the surface finish effect on fatigue behaviour at this inner surface, mechanical tests were carried out on real size tubular specimens under various thermal loadings. X ray measurements, Transmission Electron Microscopy observations and micro-hardness tests performed at and under the inner surface of the specimen before testing, revealed residual internal stresses and a large dislocation microstructure gradient in correlation with hardening gradients due to machining. A memory effect, bound to the pre-hardening gradient, was introduced into an elasto-visco-plastic model in order to determine the stress and strain fields at the inner surface. The temperature evolution on the inner surface of the tubular specimen was first computed via a thermo-elastic model and then used for our thermo-mechanical simulations. Identification of the thermo-mechanical model parameters was based on the experimental stabilized cyclic tension-compression tests performed at 20^{\circ}C and 300^{\circ}C. A good agreement was obtained between numerical stabilized traction-compression cycle curves (with and without pre-straining) and experimental ones. This 3 dimensional simulation gave access to the evolution of the axial and tangential internal stresses and local strains during the tests. Numerical results showed: a decreasing of the tangential stress and stabilization after 40 cycles, whereas the axial stress showed weaker decreasing with the number of cycles. The results also pointed out a ratcheting and a slightly non proportional loading at the inner surface. The computed mean stress and strain values of the stabilized cycle being far from the initial ones, they could be used to get the safety margins of standard design related to fatigue, as well as to get accurate loading conditions needed for the use of more advanced fatigue analysis and criteria.

Micro-mechanisms and modelling of the corrosion fatigue behaviour of a maraging steel

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

An improved crack growth model of corrosion fatigue for steel in artificial seawater

Visualization and Location Determination of Pit Initiation Sites in Martensitic Stainless Steel during Corrosion-Fatigue Cyclic Plastic Deformation

The Initiation Characteristics of Corrosion Fatigue Crack in 18Ni (250) Steel

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Uniaxial behaviour and corrosion-welding-based constitutive model of marine structural steel

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

STUDY OF INTERACTION BETWEEN LOADS DURING CORROSION FATIGUE

Fatigue Life Assessment of Corroded AlSi10MgMn Specimens

High-Cycle Microscopic Severe Corrosion Fatigue Behavior And Life Prediction Of 25crmo Steel Used In Railway Axles

A Practical Procedure for Fatigue Assessment of Mooring Line Chains with Pitting Corrosion

Mechanistic model for hydrogen accelerated fatigue crack growth in a low carbon steel

Towards a general damage law for interior micro-defect induced fatigue cracking in martensitic steels

The Corrosion Fatigue Behavior and Mechanism of AerMet 100 Steel in 3.5% NaCl at Room Temperature

Effect of Corrosion and Post-Weld Treatment on the Fatigue Behavior of Multipass Robot GMAW Welds of S700MC Steel

Numerical analysis of pit-to-crack transition under corrosion fatigue using a stochastic pit generation algorithm

Thermo-mechanical FE model with memory effect for 304L austenitic stainless steel presenting microstructure gradient

High-Cycle Microscopic Corrosion Fatigue Behavior and Life Prediction of 25 CrMo Steel Used in Railway Axle

Synergistic Effects of Corrosion and Slow Strain Rate Loading on the Mechanical and Electrochemical Response of an Aluminium Alloy