Abstract:The current study is aimed to measure and analyze the impact of temperature (10°C < T < 90°C) and particle concentration (0.05% < φ < 1.5%) on thermo-physical properties of TiO2, ZnO and CuO nanoparticles suspended in Therminol-55. The nanoparticles were characterized by using various techniques, including TEM, XRD, FTIR, TGA/DSC. TEM images reveal that the morphology of TiO2 and ZnO as spherical nanoparticles whereas that of CuO is in the form of flakes. XRD pattern for TiO2, ZnO and CuO nanoparticles possess anatase, heaxagonal and monoclinic phase respectively. TGA results show that that TiO2 losses less mass than the ZnO and CuO nanoparticles at each stage of decomposition. Thereby making it more stable thermally as compared to the other samples. Two-step method has been employed to formulate stable Therminol-55 based nanofluids containing TiO2, ZnO and CuO nanoparticles for varying particle concentrations. Results show that the thermal conductivity of suspensions containing solid conducting particles increase with increasing nanoparticle content and temperature of dispersions in the fluid. The thermal conductivity of TiO2/Therminol-55, ZnO/Therminol-55 and CuO/Therminol-55 nanofluids increases up to 17.62%, 21.55% and 24.32% at particle concentration of 1.5 wt%. Further, the experimental results demonstrate that the density of nanofluids increased significantly with increase in concentration and decreased with temperature. Surface tension of nanofluids shows decrease with increase in particle concentration. This indicates that adding nanoparticles improve thermo-physical properties of nanofluid, making it suitable for use in heat pipe. The measured data for thermal conductivity and density are compared with existing theoretical models of nanofluids to check the effectivity of conventional models. A multi-variable new generalized correlations for thermal conductivity and density of Therminol-55 based nanofluids containing TiO 2, ZnO and CuO nanoparticles are proposed.

Effects of CuO mass concentrations on water-based CuO nanofluid heat pipe for thermal energy extraction: inhibition of coal spontaneous combustion

Thermal removal from coal fires by a two-phase closed thermosyphon with a CuO nanofluid

EFFECTS OF CuO/WATER NANOFLUID APPLICATION ON THERMAL PERFORMANCE OF MESH WICK HEAT PIPE

Coupling effect of operational factors on heat extraction from a coal pile using a two-phase closed thermosyphon

Application of aqueous nanofluids in a horizontal mesh heat pipe

Experimental investigation on the use of CuO/water nanofluid in horizontal spiral-coil ground heat exchanger

Effectiveness study in shell and tube heat exchanger at various concentrations of CuO nanofluid for parallel flow

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

An Experimental Investigation on Aqueous Fe–CuO Hybrid Nanofluid Usage in a Plain Heat Pipe

Key Parameters of Preventing Spontaneous Combustion of Coal Stockpile Based on Heat Transfer Technology by a Heat Pipe

Enhancement and experimental study on thermal behaviour of heat pipe based solar absorber by using CuO nanofluid

Experimental Study on Boiling of Nanofluids in Copper Foam

Influence of heat pipe layout parameters on the cooling effect of spontaneous combustion coal gangue dumps

Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites

Effects of Nanoparticle Parameters on Thermal Performance of the Evaporator in A Small Capillary Pumped Loop Using Nanofluid

Thermal Extraction from a Low-Temperature Stage of Coal Pile Spontaneous Combustion by Two-Phase Closed Thermosyphon

Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels

Thermal Performance of an Oscillating Heat Pipe with Al2O3–water Nanofluids

Study on Dispersion Behavior and Thermal Conductivity of Cu-H2O Nanofluids

Experimental investigation for heat transfer performance of CuO-water nanofluid in a double pipe heat exchanger

Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces