Abstract:Abstract Heat pipes are passive heat transfer systems and serve as an effective thermal management solution for electronic devices. The adaptability of heat pipes makes these suited for a wide application range, especially in the field of electronic thermal management. The current study highlights the transient numerical analysis of wickless heat pipes (thermosyphons) for the thermal management of electronic devices. The thermal performance of the thermosyphon is analyzed using both copper oxide (CuO) and aluminum oxide (Al2O3) nanofluids with their concentrations at 1% and 5%. Deionized (DI) water is employed as a reference case for comparison. The study is carried out for variable heat inputs to the thermosyphon ranging 10–50 W for a time interval of 30 s. The idea is to analyze the effect of the evaporator heat input and the nanoparticles concentration on the temperature, heat transfer coefficient, thermal resistance, and effective thermal conductivity of the heat pipe. The results indicate that CuO nanoparticles at a 5% concentration lead to a maximum thermal resistance reduction of 4.31% at 50 W, while alumina nanoparticles at the same concentration lead to a more substantial reduction of 6.66% at the same heat load. The evaporator temperature varies between 377.52 K to 374.99 K using deionized water, and 376.95 K to 374.29 K using CuO nanofluid (at 1% concentration). The heat pipe's evaporator attains its highest convective heat transfer coefficient (437.91 W/m2K) by using alumina nanofluid with 1% nanoparticle concentration at 50 W. Moreover, the effective thermal conductivity of the heat pipe is enhanced by 5% and 7% for copper oxide and aluminum oxide nanofluids (with 5% concentration), respectively, at 50 W. Thus, the nanofluids play a significant role in improving the efficiency and reliability of electronic components. These findings demonstrate the potential of using the nanofluids in thermosyphons to enhance their thermal performance in electronic cooling applications.

EFFECTS OF CuO/WATER NANOFLUID APPLICATION ON THERMAL PERFORMANCE OF MESH WICK HEAT PIPE

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

An Experimental Investigation on Aqueous Fe–CuO Hybrid Nanofluid Usage in a Plain Heat Pipe

Experimental investigation for heat transfer performance of CuO-water nanofluid in a double pipe heat exchanger

Experimental Investigation to Elucidate the Temporal Effect of Nanofluids on the Thermal Performance of Heat Pipes

Effectiveness study in shell and tube heat exchanger at various concentrations of CuO nanofluid for parallel flow

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Effects of CuO mass concentrations on water-based CuO nanofluid heat pipe for thermal energy extraction: inhibition of coal spontaneous combustion

Experimental investigation on the use of CuO/water nanofluid in horizontal spiral-coil ground heat exchanger

Effects of Hybrid Nanofluids on the Thermal Performance of Heat Pipe: An Experimental Investigation

Experimental Investigation on Thermal Performance of Double-U-tube Heat Exchanger Using CuO/water Nanofluid as Heat Transfer Fluid

SLIP effects on heat and mass transfer through CuO-water nanofluid in a horizontal channel heated at center

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

High Performance Copper-Water Heat Pipes with Nanoengineered Evaporator Sections

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

EXPERIMENTAL STUDY ON IMPROVING HEAT TRANSFER ABILITY OF A HEAT PIPE UTILIZING IRON OXIDE-FERRIC OXIDE HYBRID AND NICKEL FERRITE MONO-MAGNETIC NANOFLUIDS

Enhancement and experimental study on thermal behaviour of heat pipe based solar absorber by using CuO nanofluid

Thermal performance of screen mesh wick heat pipes using water-based copper nanofluids

Filling Ratio Optimization for High-Performance Nanoengineered Copper-Water Heat Pipes

Investigation on thermal performance of electric heaters with nanofluids

Distilled Water-Based AlN + ZnO Binary Hybrid Nanofluid Utilization in a Heat Pipe and Investigation of Its Effects on Performance