Abstract:The two-phase closed thermosyphon-thermoelectric generator (TPCT-TEG) is promising in waste heat recovery for coal spontaneous combustion (CSC). The thermal resistance is primarily on the solid coal side, but relevant investigation is rare in terms of heat transfer enhancement through optimized pipe design when applying the TPCT-TEG system in CSC. In this work, aiming at improving the heat extraction efficiency and reduce the control thermal resistance at coal side, the thermosyphon with an L-shape curved pipe structure instead of conventional vertical-straight pipe for TPCT is proposed to achieve an enlarged heat exchange area and reduce thermal resistance under a certain burial height in the coal seam. To examine the influence of the curving angle and heat exchange area, a heat transfer performance test for seven TPCTs with various pipe structures is conducted with the conventional vertical-straight TPCT as a benchmark for comparison. The optimal geometrical structure of TPCT is determined accordingly. Then the curved TPCT-TEG unit is integrated with six pieces of Bi 2 Te 3 thermoelectric modules. The experimental system of heat recovery with TPCT-TEG unit for coal spontaneous combustion is established to examine the thermal-electric characteristics of the optimal curved TPCT-TEG unit when applied in the heated coal. The bottom of the coal storage box is electrically heated to simulate the spontaneous combustion of coal containing heat energy. The heat energy extraction and thermoelectric energy conversion performance are investigated under different heating source temperatures from 100 to 300 °C. The results show that the TPCT with a 30° curving angle under an equivalent burial depth as the conventional vertical-straight TPCT has lower thermal resistance (0.08 °C/W) and higher heat transfer efficiency (81.84 %), achieving a 62.1 % reduction of the thermal resistance than the vertical one. The curving angle and the heat exchange area have a synergistic influence on the thermal performance of the TPCT. Meanwhile, the thermal performance of the TPCT is more sensitive to the change of heat exchange area under the test conditions in this work. When applying the curved TPCT-TEG unit to coal, the coal temperature at the bottom and middle locations decreases significantly, the maximum temperature reduction and temperature reduction rate are 203.6 °C and 68.5 %, respectively. When the heating source temperature is 300 °C, the average thermoelectric electromotive force of the TPCT-TEG is 4.36 V. The cumulative power generation of the system is 11.25 kJ under matched electrical load of 33 Ω within 30 h of operation period.

Coupling effect of operational factors on heat extraction from a coal pile using a two-phase closed thermosyphon

Thermal Extraction from a Low-Temperature Stage of Coal Pile Spontaneous Combustion by Two-Phase Closed Thermosyphon

Thermal removal from coal fires by a two-phase closed thermosyphon with a CuO nanofluid

Optimal Design and Thermodynamic Analysis on the Hydrogen Oxidation Reactor in a Combined Hydrogen Production and Power Generation System Based on Coal Gasification in Supercritical Water

Thermodynamic Analysis of Coal-Fired Thermal Power Units Coupled S-CO2 Energy Storage System

Experimental investigation on thermal-electric characteristics of curved thermosyphon-thermoelectric generator in waste heat recovery of coal spontaneous combustion

Nanofluidic Two-Phase Closed Thermosyphon-Assisted Thermoelectric Generator for Heat Recovery from Coal Spontaneous Combustion

Effects of CuO mass concentrations on water-based CuO nanofluid heat pipe for thermal energy extraction: inhibition of coal spontaneous combustion

Key Parameters of Preventing Spontaneous Combustion of Coal Stockpile Based on Heat Transfer Technology by a Heat Pipe

Sustainable utilisation and transformation of the thermal energy from coalfield fires: A comprehensive review

Combination of heat energy extraction and fire control in underground high-temperature zones of coal fire areas

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Experimental study on influencing factors of residual coal heat transfer in goaf based on infrared imaging

Influence of heat pipe layout parameters on the cooling effect of spontaneous combustion coal gangue dumps

Study of phase change heat absorption on inhibiting coal spontaneous combustion: microcalorimetry and coal autoxidation properties under the interrupted programmed heating

CFD simulation on the operation characteristics of CO 2 two-phase thermosyphon loop

Modeling and parametric analysis of low-temperature oxidative self-heating in coal stockpiles driven by natural convection

Numerical Prediction and Experimental Validation of the Low-temperature Oxidation Characteristics of Coal in a Large-scale Furnace in an Adiabatic Environment

Thermal Behaviors and Kinetic Characteristics of Coal Spontaneous Combustion at Multiple Airflow Rates by TG − DSC

Thermal coupling study during the co-processing of coal and biomass in the lab-scale adiabatic reactor

Numerical and Experimental Investigation on Co-Combustion Characteristics of Hydrothermally Treated Municipal Solid Waste with Coal in a Fluidized Bed