Abstract:Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) offer an alternative to traditional reinforced concrete columns for new construction applications due to their high strength, ductility, and corrosion resistance properties. Despite their popularity, there is a lack of accurate analytical models for the cyclic/seismic performance of CFFT columns. This is due to the absence of precise stress–strain models for FRP tubes and confined concrete under cyclic loading. Previous experiments on CFFT columns suggest that even minimal reinforcement (≤1%) provides essential energy dissipation for extreme events. However, existing stress–strain models for FRP-confined concrete often neglect the contribution of longitudinal and transverse steel reinforcement. While some researchers have proposed material models to address this issue, the analytical modeling of confinement effects from both steel reinforcement and FRP tubes, especially under lateral cyclic loading, continues to pose a significant challenge. This study aims to use previously collected experimental data to evaluate current analytical modeling approaches in OpenSeesPy3.5.1.12 to simulate the lateral cyclic behavior of CFFT columns with ±55° glass fiber-reinforced polymer (GFRP) fiber orientation. Both the lumped inelasticity and the distributed inelasticity modeling approaches are applied. The performance of various FRP confinement models is compared. The effect of plastic hinge length is also considered in the lumped plasticity approach. The findings suggest that integrating a fiber element section into the plastic hinge zone enhances the efficiency of the distributed inelasticity approach. This method accurately captures the non-linear behavior in the critical region and precisely predicts the shape of the hysteretic curve, all while reducing computational costs. Conversely, the lumped inelasticity modeling approach effectively forecasts energy dissipation and peak load values across the entire cyclic hysteresis curve, offering significant computational savings. Finally, a generalized modeling methodology for predicting the response of CFFTs under cyclic lateral load is proposed and subsequently validated using experimental results found in the existing literature.

Phenomenological modeling of fiber‐reinforced elastomeric isolators at multiple lateral deformation levels

Non‐linear time history analyses of a rigid block isolated with unbonded fiber‐reinforced elastomeric isolators (UFREIs): A comparison between 3D finite element and phenomenological models

Investigation of seismic fragility curves of unbonded FREIs: Adaptive characteristics and modeling sensitivity

A Trilinear Hysteretic Model and Design Procedure for Unbonded Fiber‐Reinforced Elastomeric Isolators

Experimental Parametric Study and Phenomenological Modeling of a Deformable Rolling Seismic Isolator

Static and dynamic experimental validations of a frictional isolator with improved internal lateral impact behavior

Parameter optimization for Pivot hysteresis model for reinforced concrete columns with different failure modes

A phenomenological constitutive model for predicting both the moderate and large deformation behavior of elastomeric materials

Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables

Analytical Modeling Approaches for the Cyclic Behavior of Concrete-Filled Circular Filament Wounded GFRP Tube Columns

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Elliptical concrete-filled FRP tubes with an embedded H-shaped steel under axial compression and cyclic lateral loading: Experimental study and modelling

A Flexure-Shear Coupling Fiber-Section Model for the Cyclic Behavior of R/C Rectangular Hollow Section Bridge Piers

Multiple performance objective design for a sliding isolator with variable curvature

A new model of a hydraulic leveraged dynamic anti-resonance vibration isolator under base excitation: A theoretical and experimental study

Multi-Performance Economical Optimization of Base Isolation System with Tuned Inerter Negative Stiffness Damper Subjected to Non-Stationary Seismic Excitation

Performance comparison of regular and smart elastomeric isolators using a new constitutive model

Modeling of A New Semi-Active/Passive Magnetorheological Elastomer Isolator

An inelastic beam-like model for nonlinear dynamic analyses of multi-storey buildings

Experimental Study on the Mechanical Properties of Nylon Fabric-Reinforced Elastomeric Isolators (N-FREIs)

An Analytical Model for a Pneumatic Vibration Isolator with the Stiffness Effect of the Elastomeric Diaphragm