Abstract:Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) offer an alternative to traditional reinforced concrete columns for new construction applications due to their high strength, ductility, and corrosion resistance properties. Despite their popularity, there is a lack of accurate analytical models for the cyclic/seismic performance of CFFT columns. This is due to the absence of precise stress–strain models for FRP tubes and confined concrete under cyclic loading. Previous experiments on CFFT columns suggest that even minimal reinforcement (≤1%) provides essential energy dissipation for extreme events. However, existing stress–strain models for FRP-confined concrete often neglect the contribution of longitudinal and transverse steel reinforcement. While some researchers have proposed material models to address this issue, the analytical modeling of confinement effects from both steel reinforcement and FRP tubes, especially under lateral cyclic loading, continues to pose a significant challenge. This study aims to use previously collected experimental data to evaluate current analytical modeling approaches in OpenSeesPy3.5.1.12 to simulate the lateral cyclic behavior of CFFT columns with ±55° glass fiber-reinforced polymer (GFRP) fiber orientation. Both the lumped inelasticity and the distributed inelasticity modeling approaches are applied. The performance of various FRP confinement models is compared. The effect of plastic hinge length is also considered in the lumped plasticity approach. The findings suggest that integrating a fiber element section into the plastic hinge zone enhances the efficiency of the distributed inelasticity approach. This method accurately captures the non-linear behavior in the critical region and precisely predicts the shape of the hysteretic curve, all while reducing computational costs. Conversely, the lumped inelasticity modeling approach effectively forecasts energy dissipation and peak load values across the entire cyclic hysteresis curve, offering significant computational savings. Finally, a generalized modeling methodology for predicting the response of CFFTs under cyclic lateral load is proposed and subsequently validated using experimental results found in the existing literature.

Elliptical concrete-filled FRP tubes with an embedded H-shaped steel under axial compression and cyclic lateral loading: Experimental study and modelling

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Seismic Performance of Circular Recycled Aggregate Concrete-Filled Steel Tubular Columns: FEM Modelling and Sensitivity Analysis

Compressive Behavior of GFRP Tubes Filled with Self-Compacting Concrete

Experimental Investigation on Large-scale Slender FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Compressive behavior of FRP-confined elliptical concrete-filled high-strength steel tube columns

Analytical Modeling Approaches for the Cyclic Behavior of Concrete-Filled Circular Filament Wounded GFRP Tube Columns

Behavior and modeling of large-scale concrete-filled FRP tubes with longitudinal steel rebars under lateral impact loading

Rectangular double-tube concrete columns with an internal elliptical high-strength steel tube: Concept and behavior

Seismic Performance of Hybrid Columns of Concrete-Filled Square Steel Tube with FRP-Confined Concrete Core

Seismic Performance of hollow section concrete-filled GFRP tubular columns under monotonic loads and cyclic loads

Cyclic Loading Tests and Numerical Modeling of Concrete-Filled 700 MPa High-Strength Steel Tubes Incorporating Deep Plasticity

Experimental and analytical research on seismic performance of ECC-filled high-strength double skin steel tubular columns with out-of-code D / t ratios

Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio

Numerical simulation and load-bearing capacity of concrete-filled steel tubes strengthened with CFRP grid-reinforced ECC under axial compression