Abstract:By combining two concentrically placed tubes (i.e., an FRP tube as the external sheath and a steel tube as the inner reinforcement) and a sandwiched concrete layer, FRP-concrete-steel double-skin tubular columns (DSTCs for short) are an attractive type of hollow-core columns suitable for bridge piers working in humid and corrosive environments. The very limited experimental studies on DSTCs under impact loading had one or two of the following limitations: (1) the void ratio phi was far smaller than the size with practical engineering value; (2) the column diameter Dc was too small compared with the section size used in real engineering. To supplement the existing research, DSTCs with a large inner void and a practical large column diameter (i.e., phi = 0.73 and 0.82; Dc = 300 mm) were experimentally investigated subjected to lateral impact loading, with particular research attentions on parameters including the impact velocity, the boundary conditions, as well as the void ratio of the DSTC specimen. Test results indicated that: (1) the failure mechanism was primarily controlled by the boundary condition; a bending-dominant failure mode was observed for the DSTC specimen with the top end free and the bottom end fixed; in contrast, a small global lateral displacement and severe localized dent deformation was observed for the DSTC specimen with the top end simply-supported and the bottom end fixed; (2) the peak impact force, the impact duration as well as the residual lateral displacement had a positive correlation trend with the impact velocity; (3) a DSTC specimen with a larger void ratio had a lower peak impact force and a smaller global lateral displacement. Finite element model based on ANSYS/LS-DYNA was employed to simulate DSTCs subjected to lateral impact loading, which could yield results with reasonable accuracy.

Experimental Investigation on Large-scale Slender FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Large-Scale Hybrid FRP-concrete-steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Compressive Behavior of GFRP Tubes Filled with Self-Compacting Concrete

Hybrid FRP-concrete-steel double-skin tubular columns of varying slenderness ratios under eccentric compression

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Behavior of large-scale hybrid FRP–concrete–steel double-skin tubular columns under concentric compression

Eccentric Compression Properties of FRP-Concrete-Steel Double-Skin Square Tubular Columns

Compressive Behavior of Double-Skin Tubular Columns with High-Strength Concrete and a Filament-Wound FRP Tube

Axial Compressive Behavior of Hybrid CFRP-concrete-steel Double-Skin Tubular Columns

Experimental and Nonlinear Finite Element Simulation of Compressive Behavior in Natural FRP-Concrete-Steel Double-Skin Rectangular Tubular Columns

Tests of seismic behavior of FRP-concrete-steel double-skin tubular columns

FRP-concrete-steel Tubular Columns with a Large Inner Void under Lateral Impact Loading: Experimental Study and Finite-Element Modelling

Rectangular double-tube concrete columns with an internal elliptical high-strength steel tube: Concept and behavior

Experimental Investigation of FRP-concrete-steel Double-Skin Tubular Stubs under Axial Compressive Loading

Experimental investigation on eccentric compression behavior of FRP-confined concrete-encased cross-shaped steel columns

Experimental Research of FRP Composite Tube Confined Steel-reinforced Concrete Stub Columns Under Axial Compression

Experimental investigation on behavior of splicing glass fiber–reinforced polymer-concrete–steel double-skin tubular columns under axial compression

Compressive Behavior of Double-Skin Tubular Stub Columns with Recycled Aggregate Concrete and a PET FRP Jacket

Analytical and experimental investigation on axial compression capacity of carbon fiber-reinforced plastic-confined concrete-filled double-skin steel tube stub columns

Experimental and Numerical Investigations on Concrete-Filled Double-Tubular Slender Columns under Axial and Eccentric Loading