Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Tests of seismic behavior of FRP-concrete-steel double-skin tubular columns

Experimental Investigation on Large-scale Slender FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Large-Scale Hybrid FRP-concrete-steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Experimental Investigation of FRP-concrete-steel Double-Skin Tubular Stubs under Axial Compressive Loading

Axial Compressive Behavior of Hybrid CFRP-concrete-steel Double-Skin Tubular Columns

Compressive Behavior of Double-Skin Tubular Columns with High-Strength Concrete and a Filament-Wound FRP Tube

Tests on cyclic performance of FRP–concrete–steel double-skin tubular columns

Hybrid FRP-concrete-steel double-skin tubular columns of varying slenderness ratios under eccentric compression

Column tests of dodecagonal section double skin concrete-filled steel tubes

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental and Nonlinear Finite Element Simulation of Compressive Behavior in Natural FRP-Concrete-Steel Double-Skin Rectangular Tubular Columns

Behavior of large-scale hybrid FRP–concrete–steel double-skin tubular columns under concentric compression

Analytical and experimental investigation on axial compression capacity of carbon fiber-reinforced plastic-confined concrete-filled double-skin steel tube stub columns

Experimental Research of FRP Composite Tube Confined Steel-reinforced Concrete Stub Columns Under Axial Compression

Experimental Study on Axial Compressive Behavior of Gangue Aggregate Concrete Filled FRP and Thin-Walled Steel Double Tubular Columns

Experimental behavior of concrete-filled double-skin tubular columns with outer galvanized corrugated steel tubes under axial compression