Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

An Analytical Model for a Pneumatic Vibration Isolator with the Stiffness Effect of the Elastomeric Diaphragm

Analysis of Pneumatic Vibration Isolator Considering Diaphragm Stiffness

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Research on dynamic stiffness of the damping element in bellows-type fluid viscous damper by a simplified model

A new model of a hydraulic leveraged dynamic anti-resonance vibration isolator under base excitation: A theoretical and experimental study

Stiffness of pneumatic membrane in a dual-chamber pneumatic isolator

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Modeling and parametric research of a bellows-type fluid viscous damper with annular damping gap for spacecraft micro-vibration suppression

Performance Analysis of Dual-Chamber Pneumatic Vibration Isolator

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects

Modeling and analysis of dual-chamber pneumatic spring with adjustable damping for precision vibration isolation

Active suppression control of diaphragm-type pneumatic vibration isolators by using FAT-based adaptive controller with fuzzy compensation

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Analytical Deflection Model and Parametric Optimization of a Circular Diaphragm-type Piezoactuator

Theoretical modeling and experimental test for dynamic characteristics of an air-spring vibration isolation system

A theoretical model of amplitude-dependent dynamical stiffness for cord-rubber air springs