Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

Stiffness of pneumatic membrane in a dual-chamber pneumatic isolator

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Analysis of Pneumatic Vibration Isolator Considering Diaphragm Stiffness

An Analytical Model for a Pneumatic Vibration Isolator with the Stiffness Effect of the Elastomeric Diaphragm

FEM Based Simulation Study on Static and Dynamic Properties of Port Plate in Axial Piston Pump

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Kinematic and Quasi-Static Analysis Model of a Novel Variable Stiffness Pneumatic Artificial Muscle

Performance Analysis of Dual-Chamber Pneumatic Vibration Isolator

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Theoretical modeling and experimental test for dynamic characteristics of an air-spring vibration isolation system

A new model of a hydraulic leveraged dynamic anti-resonance vibration isolator under base excitation: A theoretical and experimental study

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Research on Modeling and Optimization of a Dual Chamber Air Spring Vibration Isolation System

Pneumatic Stiffness Simulation of Wind Tunnel Aeroelastic Model Tests for Closed Long-Span Roof

Research on dynamic stiffness of the damping element in bellows-type fluid viscous damper by a simplified model

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Structronics and Actuation of Hybrid Electrostrictive/Piezoelectric Thin Shells

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects

A Universal Dynamical Model of Dual-Chamber Air Springs with Experimental Validation