Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Heterogeneous nucleation of M2B-type borides (M = Cr, Fe) attached to TiB2 and Ti(C,N) particles in as-cast high borated steel

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Microstructural evolution and mechanical properties of titanium-alloying high borated steel sheets fabricated by twin-roll strip casting

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

New insights into the formation mechanism of the multicomponent carbides (Nb, M)C (M = Ti, Cr and Mn)

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Structural stability and the alloying effect of TiB polymorphs in TiAl alloys

M5B3 Boride at the Grain Boundary of a Nickel-based Superalloy

Structures and formation mechanism of borides with varied morphologies in cast γ-TiAl alloys

Tensile Behavior of Cast Γ-Tial Alloys with Varied Boride Morphologies

Heterogeneous nucleation of carbides attached to Y2O3 in Y-modified H13 steel

High-density twin boundaries in transition metal nitride coating with boron doping

Influence of boron content on boride characteristics in cast Ti-45Al-2Mn-2Nb-xB alloys

A comparative study of high boron alloys with 2.0 wt% B based on 304 and 316 stainless steels

Observation of co-segregation of titanium and boron at the interface between recrystallized and unrecrystallized grains in cold-rolled interstitial-free steel sheets

Transfer from M3B2 boride to BN nitride in 9Cr3W3CoB martensitic heat-resistant steel

Effects of boron content on the microstructure and mechanical properties of twin-roll strip casting borated steel sheets

Precipitation behavior of the M23C6 phase on the coherent twin boundary of 25Cr-20Ni-Nb-N steel

Atomistic Nucleation Mechanism of Titanium Oxides in Steel Based on Homogeneous and Heterogeneous Modes

Strength–ductility balance optimization of Fe2NiCr0.5Cu0.2Al0.3Ti0.1 multicomponent alloy via doping trace amounts of boron

First-principles study on TiC/TiN heterogeneous nucleation interface in high-titanium steel