Abstract:To improve the strength and ductility of TiAl alloys by second phase,Ti46Al4Nb1Mo alloys doped with different B content(0.4％,0.8％,1.2％,1.6％and 2.0％,atomic percent,hereafter in at.％,referred to as TNM-xB)were prepared.Macro/microstructure evolution,mechanical properties and deformation mechanisms of the alloys were studied systematically.Results showed that the microstructure of TNM-0.4B and TNM-0.8B alloy remained columnar dendrites,and the secondary dendritic arms of columnar grains were more obvious.When the content of B is 1.2％,the columnar dendrites transformed to equiaxed grains,and theα2/γ lamellae colony size was further refined in TNM-1.6B and TNM-2.0B alloy.The morphologies and kinds of the borides were changed with increasing B content,XRD results showed that TiB phase ap-peared with 1.6％B content,and both TiB and TiB2 phase formed in TNM-2.0B alloy.There were straight and curved TiB phases located around grain boundaries in TNM-0.4B and TNM-0.8B alloy,and when the content of B increased to 1.2％,the curved TiB phases were reduced,while the tiny and straight TiB phases increased.With further increasing B content to 1.6％and 2.0％,the tiny and straight TiB phases were coarser.Compressive testing results showed that the mechanical properties of the TNM alloy were enhanced with increasing B content.The maximum strength and strain of TNM alloy were 2339MPa and 33.7％with 1.6％B addition.The compressive strength and strain were mainly enhanced via refinement of lamellar colony and formation of TiB,and it is found that pile-up of dislocations and deformed twins promoted by TiB are predominant in improving the mechanical properties of TNM alloys with higher strength and strain.

Structural stability and the alloying effect of TiB polymorphs in TiAl alloys

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Boride Formation, Microstructure Evolution, and Mechanical Properties of Ti42Al6Nb2.6C0.8Ta Alloyed by Boron

Effects of Boron on Microstructure Evolution and Mechanical Properties in Ti46Al8Nb2.6C0.8Ta Alloys

Effects of boron, Hf and Ta content on boride morphology and microstructure of β-solidified γ-TiAl alloys

Structures and formation mechanism of borides with varied morphologies in cast γ-TiAl alloys

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

Formation and Kinds of Boride on Microstructure Evolution and Mechanical Properties in Ti47.5Al2.0Cr2.0NbxB Alloys

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

Individual and Synergistic Effects of Ta and Mn on Optimizing the Microstructures and Mechanical Properties of TiB Reinforced High Nb–TiAl Composites

Effect of TiB2 addition on microstructure and fluidity of cast TiAl alloy

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Effects of Cooling Rate on Borides Morphology and Structure in Cast Β-Solidifying Γ-Tial Alloy

The Effect of Nb Doping on the Properties of Ti-Al Intermetallic Compounds Using First-Principles Calculations

Influence of boron content on boride characteristics in cast Ti-45Al-2Mn-2Nb-xB alloys

Solidification Features of Ti45Al Alloys with Different Boron Addition

Enhanced Strength and Ductility in Ti46Al4Nb1Mo Alloys Via Boron Addition

Microstructure characterization, mechanical properties and toughening mechanism of TiB 2 -containing conventional cast TiAl-based alloy

Effect of Boron Doping on Microstructure of Directionally Solidified Ti–46Al–2Cr–2Nb Alloy

Coupling Effects of Hafnium and Boron Additions on Solidification Structure Evolution in Ti46Al Alloy

An Ab Initio Molecular Dynamics Study on the Structural and Electronic Properties of AlB2, TiB2 and (alx,ti(1−x))b2 in Al–Ti–B Master Alloys