Abstract:Multijunction (MJ) solar cells have demonstrated high efficiencies owing to the effective use of solar energy. GaAs//CuInGaSe(CIGSe)‐based MJ solar cells have been developed into unique devices. Furthermore, low‐concentration solar cells offer a practical solution with high efficiency and low cost. The potential of smart‐stack GaAs//CIGSe‐based MJ solar cells is examined for use under low‐concentration sunlight. Multijunction (MJ) solar cells have demonstrated very high efficiencies (>30%) owing to the effective use of solar energy. Among these, the GaAs//CuInGaSe(CIGSe)‐based MJ solar cell is unique owing to its features, such as being lightweight owing to the combination of thin cells and allowing the use of flexible substrates such as thin metal plates and polymer films. Furthermore, low‐concentration solar cells offer a practical solution with high efficiency and low cost. Previously, an efficiency of more than 30% was attained for an InGaP/GaAs//CIGSe three‐junction solar cell fabricated via mechanical stacking using Pd nanoparticle arrays and a silicone adhesive (modified smart stack). In this study, the potential of GaAs//CIGSe‐based MJ solar cells is examined for application under low‐concentration sunlight. The fabricated InGaP/Al0.06Ga0.94As//CIGSe three‐junction solar cell demonstrates a maximum efficiency of 29.73% at 2.8 suns and maintained a high efficiency of ≈30% in the low‐concentration region (<10 suns). For the in‐vehicle deployment, an efficiency of 30% is sufficient to enable independent travel for 1 day in Japan. These results demonstrate the potential of smart‐stack GaAs//CIGSe‐based MJ solar cells as next‐generation solar cells.

Air-stable MXene/GaAs heterojunction solar cells with a high initial efficiency of 9.69%

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

High Efficient Solar Cell Based on Heterostructure Constructed by Graphene and GaAs Quantum Wells

RESEARCH ON 400cm2 a-Si/a-Si TANDEM SOLAR CELLS

Stable 16.2% Efficient Surface Plasmon‐Enhanced Graphene/GaAs Heterostructure Solar Cell

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

MXenes: promising donor and acceptor materials for high-efficiency heterostructure solar cells

Solar Cells: MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency (Adv. Energy Mater. 22/2019)

MXene‐Interconnected Two‐Terminal, Mechanically‐Stacked Perovskite/Silicon Tandem Solar Cell with High Efficiency

High performance solar cells based on graphene-GaAs heterostructures

18.5% Efficient Graphene/gaas Van Der Waals Heterostructure Solar Cell

Solution-processed silicon/SnCl2-treated Ti3C2Tx MXene Schottky junction solar cells

Doping-free Janus homojunction solar cell with efficiency exceeding 23%

Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment

Ti3C2 MXene Nanosheets–Modified TiO2 Electron‐Transport Layers Enables Efficient Solar Cells with Outstanding Device Consistency

GaAs//CuInGaSe‐Based Multijunction Solar Cells with 30% Efficiency Under Low Concentrated Sunlight

Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells

Enhancing Conductivity in Silicon Heterojunction Solar Cells with Silver Nanowire-Assisted Ti3C2Tx MXene Electrodes for Cost-Effective and Scalable Photovoltaics

Interfacial Engineering of Au@Nb2CTx-MXene Modulates the Growth Strain, Suppresses the Auger Recombination, and Enables an Open-Circuit Voltage of over 1.2 V in Perovskite Solar Cells

Laser Manufactured Nano‐MXenes with Tailored Halogen Terminations Enable Interfacial Ionic Stabilization of High Performance Perovskite Solar Cells

Interfacial Band Engineering of Highly Efficient PEDOT:PSS/p‐Si/ZnO Heterojunction Solar Cells