Abstract:The leakage current suppression mechanism in AlGaN/GaN High Electron Mobility Transistors (HEMTs) is investigated. It is known that leakage current can cause severe reliability problems for HEMT devices and conventional AlGaN/GaN HEMT devices suffer from detrimental off-state drain leakage current issues, especially under high off-state drain bias. Therefore, a leakage current suppression technique featuring hybrid-Schottky/ohmic-drain contact is discussed. Through the 2-zones leakage current suppression mechanism by the hybrid-Schottky/drain metal including the shielding effect of the rough ohmic-drain metal morphology and the drain side electric field modulation, AlGaN/GaN HEMT featuring this novel technique can significantly enhance the leakage current suppression capability and improve the breakdown voltage. An analytical method using loop-voltage-scanning is proposed to illustrate the optimization procedure of the hybrid-Schottky/ohmic drain metallization on leakage current suppression. Through the comparison of the loop leakage current hysteresis of conventional ohmic drain HEMT and hybrid-Schottky/ohmic drain, the leakage current suppression mechanism is verified through the leakage current considering surface acceptor-like trap charging/discharging model. Device featuring the hybrid-Schottky/ohmic drain technique shows an improvement in breakdown voltage from 450 V (with no Schottky drain metal) to 855 V with a total drift region length of 9 mu m, indicating enhanced off-state reliability characteristics for the AlGaN/GaN HEMT devices. (C) 2014 Elsevier Ltd. All rights reserved.

Novel Super Stack Passivation in AlGaN/GaN HEMT for Power Electronic Applications

Study on a p-GaN HEMT with composite passivation and composite barrier layers

Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistors with Various Dielectric Passivation Structures for High-Power and High-Frequency Operations: A Simulation Study

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design

Comparative Study of Si3N4-PECVD and Al2O3-ALD Surface Passivation in T-Shaped Gate InAlAs/InGaAs InP Based HEMTs

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics

High-performance normally off p-GaN gate high-electron-mobility transistor with In0.17Al0.83N barrier layer design

Study of AlGaN/GaN Vertical Superjunction HEMT for Improvement of Breakdown Voltage and Specific On-Resistance

Simulation of High Breakdown Voltage, Improved Current Collapse Suppression, and Enhanced Frequency Response AlGaN/GaN HEMT Using A Double Floating Field Plate

A Novel AlGaN/Si3N4 Compound Buffer Layer HEMT with Improved Breakdown Performances

Optimization of Gate-Head-Top/Bottom Lengths of AlGaN/GaN High-Electron-Mobility Transistors with a Gate-Recessed Structure for High-Power Operations: A Simulation Study

Design and electrical modelling of a depletion-mode P-type triple-field-plated AlGaN/GaN on SiC HEMT with 2.45 kV breakdown voltage

An Improved Design for E-Mode AlGaN/GaN HEMT with Gate Stack -Ga2o3/p-gan Structure

Enhancement of Johnson figure of merit in III‐V HEMT combined with discrete field plate and AlGaN blocking layer

Novel T-Shaped Gate With Air Gap for AlGaN/GaN HEMTs on Silicon With High Johnson's Figures of Merit

Analysis of Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Various Slant-Gate-Based Structures: A Simulation Study

Study of the Leakage Current Suppression for Hybrid-Schottky/ohmic Drain AlGaN/GaN HEMT

Optimization AlGaN/GaN HEMT with Field Plate Structures

Performance Improvement and Current Collapse Suppression of Al 2 O 3 /AlGaN/GaN HEMTs Achieved by Fluorinated Graphene Passivation

Current-collapse Suppression and Leakage-Current Decrease in AlGaN/GaN HEMT by Sputter-Tan Gate-Dielectric Layer