Abstract:Ruddlesden-Popper LaxSr2−xMnO4−δ materials are interesting symmetric solid oxide fuel cell electrodes due to their good redox stability, mixed ionic and electronic conducting behavior and thermal expansion that matches well with common electrolytes. In reducing environments - as at a solid oxide fuel cell anode - the x = 0.5 member, i.e. La0.5Sr1.5MnO4−δ, has a much higher total conductivity than compounds with a different La/Sr ratio, although all those compositions have the same K2NiF4-type I4/mmm structure. The origin for this conductivity difference is not yet known in literature. Now, a combination of in-situ and ex-situ 3D electron diffraction, high-resolution imaging, energy-dispersive X-ray analysis and electron energy-loss spectroscopy uncovered clear differences between x=0.25 and x=0.5 in the pristine structure, as well as in the transformations upon high-temperature reduction. In La0.5Sr1.5MnO4−δ, Ruddlesden-Popper n=2 layer defects and an amorphous surface layer are present, but not in La0.25Sr1.75MnO4−δ. After annealing at 700°C in 5% H2/Ar, La0.25Sr1.75MnO4−δ transforms to a tetragonal 2D incommensurately modulated structure with modulation vectors q1 = 0.2848(1) · (a* +b*) and q2 =0.2848(1) · (a* -b*), whereas La0.5Sr1.5MnO4−δ only partially transforms to an orthorhombic 1D incommensurately modulated structure, with q = 0.318(2) · (a* - b*). Perovskite domains grow at the crystal edge at 700°C in 5% H2 or vacuum, due to the higher La concentration on the surface compared to the bulk, which leads to a different thermodynamic equilibrium. Since it is known that a lower degree of oxygen vacancy ordering and a higher amount of perovskite blocks enhance oxygen mobility, those differences in defect structure and structural transformation upon reduction, might all contribute to the higher conductivity of La0.5Sr1.5MnO4−δ in solid oxide fuel cell anode conditions compared to other La/Sr ratios.

Properties of oxides for high temperature solid electrolyte fuel cell

Influence of Isovalent ‘W’ Substitutions on the Structure and Electrical Properties of La2Mo2O9 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells

Performance and optimization of perovskite-type La1·4Ca0·6CoMnO5+δ cathode for intermediate-temperature solid oxide fuel cells

Synthesis and Ionic Conductivity of Lanthanum-based Ceria Ce1−xLaxO2−δ Electrolytes for Solid Oxide Fuel Cell Applications

Development of high-performance perovskite La(Mg2/3Nb1/3)O3 electrolyte with hybrid protonic/oxide ion conduction for low-temperature solid oxide fuel cells

Fabrication and performance analysis of A-site metal-promoted La0.595V0.005Sr0.4CoO3−∂ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

Phase Stability of Perovskite Oxide Electrodes under Operating Condition in Solid Oxide Fuel Cell

Preparation And Characterization Of La0.9sr0.1ga0.8mg0.2o2.85-(Li/Na)(2)Co3 Composite Electrolytes

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Characterization of Cation-Ordered Perovskite Oxide LaBaCo2O5+δ As Cathode of Intermediate-Temperature Solid Oxide Fuel Cells

High-temperature properties of mixed conductors LaxSr0.85−xCe0.15FeO3−δ

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Structural properties and electrical conductivity of perovskite-type oxides in SOFCs

Enhancing ORR Catalytic Activity and Electrochemical Investigation of La1−2xBaxBixFeO3 Cathode for Low-Temperature Solid Oxide Fuel Cell

Synergistic electron doping and ion conductive phase incorporating of SrCoO3- as desirable cathode materials for intermediate-temperature solid oxide fuel cells

Preparation and electrical properties of pyrochlore R2(ZrTi)O7 for solid oxide fuel cell electrolyte

A-site double-lanthanide-doped La1−xPrxBaCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells

A Cobalt-Free Layered Oxide As an Oxygen Reduction Catalyst for Intermediate-Temperature Solid Oxide Fuel Cells

Incommensurate Modulations and Perovskite Growth in LaxSr2-xMnO4−δ Affecting Solid Oxide Fuel Cell Conductivity

Oxygen vacancies-rich iron-based perovskite-like electrodes for symmetrical solid oxide fuel cells

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells