Abstract:In this work, a mechanochemical process using high-energy milling conditions was employed to synthesize La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) powders from the corresponding stoichiometric amounts of La2O3, SrO, Ga2O3, and MgO in a short time. After 60 min of milling, the desired final product was obtained without the need for any subsequent annealing treatment. A half solid oxide fuel cell (SOFC) was then developed using LSGM as an electrolyte and La0.8Sr0.2MnO3 (LSM) as an electrode, both obtained by mechanochemistry. The characterization by X-ray diffraction of as-prepared powders showed that LSGM and LSM present a perovskite structure and pseudo-cubic symmetry. The thermal and chemical stability between the electrolyte (LSGM) and the electrode (LSM) were analyzed by dynamic X-ray diffraction as a function of temperature. The electrolyte (LSGM) is thermally stable up to 800 and from 900 °C, where the secondary phases of LaSrGa3O7 and LaSrGaO4 appear. The best sintering temperature for the electrolyte is 1400 °C, since at this temperature, LaSrGaO4 disappears and the percentage of LaSrGa3O7 is minimized. The electrolyte is chemically compatible with the electrode up to 800 °C. The powder sample of the electrolyte (LSGM) at 1400 °C observed by HRTEM indicates that the cubic symmetry Pm-3m is preserved. The SOFC was constructed using the brush-painting technique; the electrode–electrolyte interface characterized by SEM presented good adhesion at 800 °C. The electrical properties of the electrolyte and the half-cell were analyzed by complex impedance spectroscopy. It was found that LSGM is a good candidate to be used as an electrolyte in SOFC, with an Ea value of 0.9 eV, and the LSM sample is a good candidate to be used as cathode.

Preparation And Characterization Of La0.9sr0.1ga0.8mg0.2o2.85-(Li/Na)(2)Co3 Composite Electrolytes

Ionic Transport Mechanism of La0.9sr0.1ga0.8mg0.2o2.85-(Li/Na)(2)Co3 Composite Electrolyte for Low Temperature Sofcs

Preparation and Properties of LSGM (Li/Na)(2)CO3 Composite Electrolytes for LT SOFC

Thermal stability study of La0.9Sr0.1Ga0.8Mg0.2O2.85–(Li/Na)2CO3 composite electrolytes for low-temperature solid oxide fuel cells

Thermal Stability of LSGM-Carbonates Composite Electrolytes for Low-Temperature Solid Oxide Fuel Cells

Microstructure And Electrical Conductivity Of La0.9sr0.1 Ga0.8mg0.2o2.85-Ce0.8gd0.2o1.9 Composite Electrolytes For Sofcs

LSGM-Carbonate Composite Electrolytes for Intermediate-Temperate SOFCs

Preparation and Conductivity of LSGM-(Li/Na)(2)CO3 Composite Electrolyte

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Preparation and Property of LSGM-Carbonate Composite Electrolyte for Low Temperature Solid Oxide Fuel Cell

Recent progress in LaGaO3 based solid electrolyte for intermediate temperature SOFCs

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

OPTIMIZATION OF SDE-(Li/Na)2CO3 COMPOSITE ELECTROLYTE FOR LOW-TEMPERATURE SOLID OXIDE FUEL CELL APPLICATIONS

Preparation and characterization of La0.9Sr0.1 Ga0.8Mg0.2O2.85 oxygen-ion conductor

Properties of Novel BZCY-(Li/Na)(2)CO3 Composite Electrolytes for LT-SOFC

Development by Mechanochemistry of La0.8Sr0.2Ga0.8Mg0.2O2.8 Electrolyte for SOFCs

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Effects of Salt Composition on the Electrical Properties of Samaria-Doped Ceria/carbonate Composite Electrolytes for Low-Temperature SOFCs

The Investigation of Ag & LaCo0.6Ni0.4O3−δ Composites As Cathode Contact Material for Intermediate Temperature Solid Oxide Fuel Cells

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation