Abstract:Recent studies related to cathode materials for solid oxide fuel cells (SOFCs) have showcased the feasibility of stabilizing cubic or tetragonal perovskite phases in the SrCoO3−δ system at room temperature. This achievement has been facilitated by partially substituting Co atoms with small amounts of highly charged cations such as Ir4+ in SrCo0.90Ir0.10O3−δ. This specific material exhibits exceptional performance as a cathode for SOFCs operating at intermediate temperatures (800–850 °C). However, it contains a high amount of cobalt, which is both costly and toxic. In this study, our focus has been on further improving this material by reducing its cobalt content, resulting in a cleaner and more cost-effective cathode for SOFCs. The resulting SrCo0.50Fe0.40Ir0.10O3−δ perovskite, synthesized by the citrate method, introduces a 40% composition of Fe in the sites of Co and Ir, effectively decreasing the amount of Co in the material. The crystal structure of this perovskite oxide has been analyzed using X-ray diffraction (XRD) and neutron powder diffraction (NPD), allowing us to establish correlations with its mechanical and electrical properties. In the single-cell test, this material gave reasonable performances as a cathode at intermediate temperatures (800–850 °C), with La0.8Sr0.2Ga0.83Mg0.17O3−δ (LSGM) as the electrolyte. An analysis of the chemical compatibility between the cathode and the electrolyte, LSGM, demonstrated no interaction at elevated temperatures. Thermal expansion coefficient (TEC) measurements exhibited consistent linear expansion across the entire temperature range. Lastly, the perovskite displayed commendable electrical conductivity along with a promising power density measurement of 384 mW/cm2 at 850 °C. These findings collectively suggest the potential of this material as a viable cleaner cathode option for intermediate-temperature SOFCs. Moreover, the cathode was further optimized and the performance of the cell improved, by either infiltrating SrCo0.50Fe0.40Ir0.10O3−δ with a Pd(NO3)2 solution or mixing it with 30% of LSGM electrolyte, resulting in higher power densities (568 and 675 mW/cm2, respectively) in test cells fed with pure H2 as a fuel.

A Cobalt-Free Layered Oxide As an Oxygen Reduction Catalyst for Intermediate-Temperature Solid Oxide Fuel Cells

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

Oxygen Reduction Kinetic Enhancements of Intermediate-Temperature SOFC Cathodes with Novel Nd0.5Sr0.5CoO3-δ/Nd0.8Sr1.2CoO4±δ Heterointerfaces

High-Performanced Cathode with A Two-Layered R-P Structure for Intermediate Temperature Solid Oxide Fuel Cells

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells

SrCo 0.50 Fe 0.40 Ir 0.10 O 3−δ Decorated with Pd and La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3−δ : A Cleaner Electrode for Intermediate-Temperature Solid Oxide Fuel Cells with Reduced Cobalt Content

Recent Development on Perovskite‐type Cathode Materials Based on SrCoO3 − Δ Parent Oxide for Intermediate‐temperature Solid Oxide Fuel Cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Oxygen vacancy-engineered cobalt-free Ruddlesden-Popper cathode with excellent CO2 tolerance for solid oxide fuel cells

Nanoparticle Surface Modification Enhanced Anode Performance in La1.7Sr0.3Fe0.9Ru0.1O4for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced Oxygen Reduction Activity on Ruddlesden-Popper Phase Decorated La0.8Sr0.2FeO3-δ 3D Heterostructured Cathode for Solid Oxide Fuel Cells.

Achieving exceptional activity and durability toward oxygen reduction based on a cobalt-free perovskite for solid oxide fuel cells

CO2-induced In-Situ Surface Reconfiguration of Strontium Cobaltite-Based Perovskite for Accelerated Oxygen Reduction Reaction

Nickel-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-: a Highly Active Perovskite Oxygen Electrode for Reduced-Temperature Solid Oxide Fuel Cells

A Highly Oxygen Reduction Reaction Active and CO2 Durable High-entropy Cathode for Solid Oxide Fuel Cells

A Highly Stable Cobalt-Free Laba0.5sr0.5fe2o6-Delta Oxide As A High Performance Cathode Material For Solid Oxide Fuel Cells

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells

CuCo2O4-Er0.4Bi1.6O3-δ: an Active Hybrid Cathode for Intermediate Temperature Solid Oxide Fuel Cells

A Micro-Nano Porous Oxide Hybrid for Efficient Oxygen Reduction in Reduced-Temperature Solid Oxide Fuel Cells.

Tuning the Phase Transition of SrFeO3-delta by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

The Excellence of Both Worlds: Developing Effective Double Perovskite Oxide Catalyst of Oxygen Reduction Reaction for Room and Elevated Temperature Applications