Abstract:Dynamic testing of high-resolution Sigma-Delta $(\Delta\Sigma)$ Analog-to-Digital converters (ADCs) is extremely challenging and expensive since it requires the use of spectrally pure stimulus with at least 10dB better signal-to-noise ratio (SNR) and total harmonic distortion (THD) than the ADC under test. This paper presents a low cost model parameter estimation based test and diagnosis methodology for the dynamic specifications of high-precision $\Delta\Sigma$ ADCs using a multi-tone test input. In the proposed test methodology, the response of a behavioral model of the ADC incorporating its key module level non-idealities is matched with the response of the ADC under test by solving a nonlinear optimization problem that finds the best non-ideality parameters corresponding to the observed DUT test response. The dynamic specifications of the ADC are then calculated from the derived model parameters. The multi-tone test stimulus is designed in such a way as to maximize the accuracy with which the model non-ideality parameters can be calculated from the observed test response using a genetic test stimulus optimization algorithm. For test response analysis, the digital pulse sequence at the output of the sigma-delta modulator is made externally observable and utilized as a test access point. A key contribution is that the dynamic specifications such as ENOB, SNR, and THD of the converter as well as module level non-idealities contributing to those specifications can be simultaneously determined from the derived model parameters. The test method is fast and diagnosis is very accurate. Simulation results indicate the validity of the proposed methodology.

Choice of the cosine-class windows for ADC dynamic testing by spectral analysis

Windows for ADC dynamic testing via frequency-domain analysis

A data-dependent energy reduction algorithm for SAR ADC using self-adaptive window

Improved Determination of the Best Fitting Sine Wave in ADC Testing

Acceleration of the ADC Test With Sine-Wave Fit

Effective ADC linearity testing using sinewaves

Research on Analog-to-Digital Converter (ADC) Dynamic Parameter Method Based on the Sinusoidal Test Signal

An Automated Window Selection Procedure For DFT Based Detection Schemes To Reduce Windowing SNR Loss

Frequency Selection of Sine Wave for Dynamic ADC Test

Signature Testing and Diagnosis of High Precision S? ADC Dynamic Specifications Using Model Parameter Estimation

Study on the Choice of Sampling Rate in Dynamic Testing of ADC

ADC Testing With Verification

ADC Dynamic Parameter Testing Scheme Under Relaxed Conditions

Full information ADC test procedures using sinusoidal excitation, implemented in MATLAB and LabVIEW

Dynamic testing and diagnostics of A/D converters

Experimental Comparison of Different Standards for Dynamic Characterization of ADCs

A deterministic dynamic element matching approach for testing high-resolution ADCs with low-accuracy excitations

A Faster Method for Accurate Spectral Testing Without Requiring Coherent Sampling

ADC Parameter Test Based on Improved Maximum Likelihood Estimation