Abstract:Dynamic testing of high-resolution Sigma-Delta $(\Delta\Sigma)$ Analog-to-Digital converters (ADCs) is extremely challenging and expensive since it requires the use of spectrally pure stimulus with at least 10dB better signal-to-noise ratio (SNR) and total harmonic distortion (THD) than the ADC under test. This paper presents a low cost model parameter estimation based test and diagnosis methodology for the dynamic specifications of high-precision $\Delta\Sigma$ ADCs using a multi-tone test input. In the proposed test methodology, the response of a behavioral model of the ADC incorporating its key module level non-idealities is matched with the response of the ADC under test by solving a nonlinear optimization problem that finds the best non-ideality parameters corresponding to the observed DUT test response. The dynamic specifications of the ADC are then calculated from the derived model parameters. The multi-tone test stimulus is designed in such a way as to maximize the accuracy with which the model non-ideality parameters can be calculated from the observed test response using a genetic test stimulus optimization algorithm. For test response analysis, the digital pulse sequence at the output of the sigma-delta modulator is made externally observable and utilized as a test access point. A key contribution is that the dynamic specifications such as ENOB, SNR, and THD of the converter as well as module level non-idealities contributing to those specifications can be simultaneously determined from the derived model parameters. The test method is fast and diagnosis is very accurate. Simulation results indicate the validity of the proposed methodology.

ADC Parameter Test Based on Improved Maximum Likelihood Estimation

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

Research on Analog-to-Digital Converter (ADC) Dynamic Parameter Method Based on the Sinusoidal Test Signal

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

Signature Testing and Diagnosis of High Precision S? ADC Dynamic Specifications Using Model Parameter Estimation

ADC Dynamic Parameter Testing Scheme Under Relaxed Conditions

Low cost high accuracy method for testing A/D dynamic parameters

ADC Testing With Verification

Improved Determination of the Best Fitting Sine Wave in ADC Testing

A/D Converter INL and DNL Estimation with a Distorted Sinusoidal Stimulus Signal

Testing development for ADC on automatic test system

Parameter Optimization Of Deterministic Dynamic Element Matching Dacs For Accurate And Cost-Effective Adc Testing

ADC Dynamic Parameter Test Based on Time-Frequency Calculation

An Improved Sine Fitting Test for the Data Acquisition System

Full information ADC test procedures using sinusoidal excitation, implemented in MATLAB and LabVIEW

High-Resolution Low-Sampling-Rate Δ∑ ADC Linearity Short-Time Testing Algorithm

Testing and optimizing ADC performance: a probabilistic approach

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.