Abstract:Coral sand particles exhibit a wide range of shapes, which can be divided into four shapes, e.g., blocky, dendritic and rodlike, flaky, and shell debris. The particle shape of these mixtures is defined by the sphericity, concavity, aspect ratio, flatness and overall regularity, which ranges from 0 to 1. The effect of particle shape on the strength, crushing characteristics, and critical state parameter is systematically investigated through a series of triaxial drainage shear tests under different confining pressures. And the relationship between critical state parameters and mechanical parameters is established. The test results demonstrate the existence of an evident strain-hardening phenomenon in the stress-strain curve of coral sand, accompanied by a strain-softening phenomenon when the bias stress reaches its peak value. The sample is initially subjected to shear shrinkage, followed by shear expansion. The volumetric deformation of the coral sand decreased with increasing peripheral pressure. The particles are transformed from rough irregular shapes to smooth spheres as evidenced by an increase in the shape parameter. The greater the degree of irregularity in the shape of the particles, the more pronounced the resulting change in size reduction. In addition, the critical state parameter was found to be influenced by the shape of the coral sand particles and the mode of particle accumulation. The overall shear resistance of coral sand particles was found to depend on particle rearrangement in addition to particle surface roughness and interparticle friction. It is proposed that the general regularity critical state parameter equation relates the particle shape of coral sand to its critical state mechanical properties, which is of great importance to the practical application and research of coral sand in engineering, and provides an effective means of predicting mechanical properties granular materials.

Drained shear behavior of coral sand-diatom mixtures

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Compression and Critical-State Behaviors of Calcareous Sand–diatom Mixtures

Shear strength-dilation characteristics of coral sand contained fines

Experiment of initial relative density effects on sand strength

Experimental Study of Dynamic Shear Modulus and Damping Ratio Characteristics of Coral Sand from Nansha Islands

Stress-dilatancy behavior of marine coral sand incorporating non-plastic fines

Effect of Gradation and Relative Density on Shear Strength of Coral Sand

Strength and dilatancy of coral sand in the South China Sea

Effect of the particle shape on the shear mechanical behavior of coral sand

Experimental study of triaxial shear characteristics of carbonate mixed sand

Particle size and confining-pressure effects of shear characteristics of coral sand: an experimental study

The Undrained Shear Behavior of Clean Coral Silt and Coral Silt-Sand Mixtures

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Effect of High-Stress Levels on the Shear Behavior of Geosynthetic-Reinforced Marine Coral Sands

Experimental Study on the Mechanical Strength, Deformation Behavior and Infiltration Characteristics of Coral Sand

Fixed-axis shear characteristics of marine coral sand under various consolidation conditions

Experiment Study on the Influence of Density and Confining Pressure on Triaxial Shear Properties of Calcareous Sand

Influence of Spatial Distribution of Fine Sand Layers on the Mechanical Behavior of Coral Reef Sand

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Experimental Study on Liquefaction Characteristics of Saturated Marine Coral Sand Based on Dissipated Energy Evaluation