Abstract:<p>The acoustic emission (AE) location technique is used to characterize the entire progressive failure process of rock with preexisting cracks. The mechanical properties, AE characteristics, crack dynamic propagation process, failure modes and damage-fracture evolution rules are studied for prefabricated rock samples with different crack inclination angles under uniaxial compression. The results show that the peak strength and elastic modulus first decrease and then increase with increasing crack angle. AE events exhibit different characteristics with changes in stress. In the initial compaction and elastic deformation stage, the AE activity is not obvious; when microcracks form in the rock sample, the AE count increases; after entering the crack stable growth stage, the AE activity becomes significant; during the period of unstable crack propagation to rock failure, the AE activity is extremely active. The AE location can well accurately reflect the crack initiation position, propagation direction and surface orientation in the rock. AE location can well reflect cracks initiation position, propagation direction and space surface shape in the rock. For intact samples, microcracks are first generated at the ends of the sample and extend internally along the loading direction until they coalesce and form macroscopic cracks; for precracked samples, microcracks appear first at the tips of the prefabricated crack, and extend outward at a certain angle, while the microcracks are mainly concentrated around the preexisting crack, with a small number of microcracks distributed at both ends of the sample. With increasing the crack angle, the rock failure mode changes from splitting failure to tension-shear mixed failure and finally to single shear failure. The AE positioning results are in good agreement with the observed macroscopic failure of the rock samples. The damage variable based on AE counts divides the rock damage-fracture evolution process into four stages, and the initial damage and damage rate of the rock sample with a crack angle of 45° are the largest.</p>

Study on crack initiation mechanism of notched TC4 titanium alloy plate based on acoustic emission information entropy

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Tracing fracture damage evolution and identifying damage patterns in cast steel using advanced acoustic emission analysis

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

A new method for determining the crack classification criterion in acoustic emission parameter analysis

Correlation Between Acoustic Emission Detection and Microstructural Characterization for Damage Evolution

An Investigation of Small-crack and Long-crack Propagation Behavior in Titanium Alloy TC4 and Aluminum Alloy 7475-T7351

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Study on Acoustic Emission Characteristics of Fatigue Damage of A7N01 Aluminum Alloy for High-Speed Trains

Research on Rock Crack Classification Based on Acoustic Emission Waveform Feature Extraction Technology

A novel information entropy approach for crack monitoring leveraging nondestructive evaluation sensing

Investigation on Damage Evolution and Acoustic Emission Behavior of Aluminum Alloy Sheet During Blanking Process

Study on acoustic emission properties and crack growth rate identification of rail steels under different fatigue loading conditions

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Study on crack propagation mechanism and acoustic-thermal sensitivity analysis of pre-cracked weakly cemented rock

Understanding the evolution mechanism and classification criteria of tensile -shear cracks in rock failure process from acoustic emission (AE) characteristics

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Failure Characterization of Al-Zn-Mg Alloy and Its Weld Using Integrated Acoustic Emission and Digital Image Techniques

A Method of Fracture Toughness JIC Measurement Based on Digital Image Correlation and Acoustic Emission Technique

Influence of Inclination Angle on the Acoustic Emission Characteristics of Pre-Cracked Sandstone in Uniaxial Arc Cyclic Loading and Unloading Tests

Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters