Abstract:In coal mining engineering, the mechanical properties of rocks in coal-bearing formations are important for mining safety. In addition, lithological properties are among the most crucial factors affecting the mechanical properties of a given rock. To preliminarily address this important issue, several uniaxial compression tests were conducted on three types of rocks in coal-bearing formations: argillaceous siltstone, mudstone and silty mudstone. In all of the experiments, the acoustic emission (AE) technique was employed to detect the initiation and evolution of microcracks during the testing process, and the computed tomography method was then employed to further investigate the failure patterns of the different types of rock mass. The AE results showed that failure initiated at stress levels of approximately 0.18, 0.48 and 0.05 times the peak stresses for argillaceous siltstone, mudstone and silty mudstone, respectively. Furthermore, in the argillaceous siltstone, the accumulated AE events increased gradually during loading until macrofailure occurred; in contrast, obvious plateaus in the AE parameter curves existed in the stress regions at 60–70% and 35.5–50% peak stress for mudstone and silty mudstone, respectively. In the crack coalescence stage, a large number of low-energy microfractures occurred in the argillaceous siltstone, whereas a small number of high-energy microfractures occurred in the mudstone and silty mudstone. The results revealed that (1) the argillaceous siltstone was essentially destroyed by splitting, while the mudstone and silty mudstone samples were broken by shear fracture propagation; (2) for all of the coal-bearing formation rocks investigated in this work, when the fracture surface area was larger, the strain energy to be translated into surface energy was greater, and thus, more input energy was required when the peak strength was greater. Clearly, lithological properties, especially microstructural features, play a critical role in the mechanical properties of coal-bearing formation rocks. Therefore, a comprehensive evaluation should be considered in any analysis of mining safety.

Study on crack propagation mechanism and acoustic-thermal sensitivity analysis of pre-cracked weakly cemented rock

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Study on the mechanism of energy evolution and bearing degradation in pre-cracked sandstone under non uniform cyclic loading

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

Damage evolution of rock containing prefabricated cracks based on infrared radiation and energy dissipation

Crack propagation process and acoustic emission characteristics of rock-like specimens with double parallel flaws under uniaxial compression

Crack propagation mechanism in rock-like specimens containing intermittent flaws under shear loading

Anisotropy of crack initiation strength and damage strength of coal reservoirs

Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression

Study on Mechanical Characteristics and Failure Modes of Coal–Mudstone Combined Body with Prefabricated Crack

Systematic detection and evaluation of cracking behavior of flawed brittle sandstones with AE and 3D-DIC techniques

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Tensile mechanical properties and fracture evolution characteristics of sandstone containing parallel pre-cracks under dynamic loading

Crack propagation mechanism of rock-like specimens containing non-parallel flaws subjected to internal hydraulic pressure and shear loading

Failure Characterization of Three Typical Coal-Bearing Formation Rocks Using Acoustic Emission Monitoring and X-ray Computed Tomography Techniques

Investigation of crack recognition and spatio-temporal evolution pattern in coal samples damage

Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters

Research on Rock Crack Classification Based on Acoustic Emission Waveform Feature Extraction Technology

Experimental study of the effect of crack distribution on the failure mechanism of sandstone specimens based on inclination angles and number of parallel flaws

Strength Characteristics and Failure Mechanism of Granite with Cross Cracks at Different Angles Based on DIC Method

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation